Cable pipeline locator

Description

XHGX507 intelligent cable fault tester has been used by thousands of users in the power cable test has a high reputation in the field. The company used the latest concepts developed XHGX507 pipeline locator, especially for cable-to-ground insulation failure of fast and accurate positioning, (charged) to find the path, depth positioning.?

Main Function

All-digital positioning system, and show a clear, reliable positioning

Light weight, easy to use, quick to find

Built-in rechargeable battery, the test without electricity

Depth with cable shows, current shows

LCD graphic display, without earphone test

Built-in ohmmeter measure the resistance of the cable loop

Cable locating and fault-finding with two functions

You can find up-to-ground insulation failure 2MΩ

Adapt to night-time operation with backlight

Fully automatic continuous sampling, never miss any discharge waveform;

Test method: flashover method, low pressure pulse method, multiple waveform analysis method

Technical data

Receiver

2?Operating frequency: low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz), 50Hz

2?Antenna mode: valley method (zero mode), peak method (peak mode) and step voltage method (A-frame)

2?Sound indication: signal intensity changes with the FM tone

2?Current indication: Display the current value of the effective cable under test (unit: mA)

2?Operating temperature: -10 ° C - +55 ° C

2?Battery Type: 7.4V lithium battery

2?Battery indicator: graphics

2?Battery life: continuous > 8 hours: stopped working > 16 hours

2?Size: 70cm × 20cm × 11cm

2?Weight: 3 kg (with battery)

2?Signal strength, said: ladder, the number range 0 – 999

2?Gain Control: manually adjust the dynamic range of 100db

2?Detection depth: Maximum not less than 2.5m probe

2?Maximum detection range: direct law insulated cable up to 15km

2?Depth measurement: according to the depth of three key figures, the maximum depth can be measured up to 2.5-6 m according to the site environment.?

2?Accuracy: LF: ± (1-5) % ≤ 2. 5 meter?RF: ± (5-12)% ≤ 2 .5 meter

Technical data

Transmitter

2?Operating frequency: low frequency (815Hz), intermediate frequency (8kHz), high frequency (33 kHz), radio frequency (83 kHz), 50Hz

2?Mode: direct method, coupling method, inductive method

2?Matched load: 5 ohms -3000 ohms

2?Impedance display: five digits

2?Thermal over-current: automatic protection

2?Power output: low block, mid-range, high gear

2?Battery Type:7.4V lithium battery

2?Battery life: working 4-8 hours depending on use frequency, output power. Intermittent work 6-10 hours depending on the frequency of use, output power

2?Operating temperature: -10 ° C-55 ° C

2?Dimensions: 16cm × 16cm × 39cm

Weight: 4 kg (with battery)