No business case for reteaching robots

• 举报此文章

Ginger Gardiner

Ginger Gardiner

Senior Editor at CompositesWorld.com

发布日期: 2020年7月16日

+ 关注

DLR Center for Lightweight Production Technology has developed an AI-equipped work cell where collaborative robots can switch from producing composite rear pressure bulkheads to fuselage panels without requiring reprogramming or retraining. Read more.

要查看或添加评论，请登录

Ginger Gardiner的更多文章

• Solution-based digital composites fabrication

  2021年7月29日

  Solution-based digital composites fabrication

  MIT evolves liquid biomaterials into a new approach for sustainable engineered composite structures. Read more.

  35

  3 条评论
• Reducing the cost of continuous fiber 3D printing materials

  2021年7月27日

  Reducing the cost of continuous fiber 3D printing materials

  DLR has developed a novel approach to produce thermoplastic impregnated fibers for lower cost versus current slit-tape…

  33
• Easy-to-use kits enable infield repair of composite structures

  2021年7月22日

  Easy-to-use kits enable infield repair of composite structures

  Portable kit enables patch repairs using UV-cure glass fiber/vinyl ester or room-temp stored carbon fiber/epoxy…

  30

  1 条评论
• Integrating antennas into composite aerostructures

  2021年7月19日

  Integrating antennas into composite aerostructures

  ACASIAS project integrates Ku-band array antenna in novel AFP tape orthogrid with drastically reduced tooling for more…

  49
• Adapting composites 3D printing to evolving needs

  2021年7月16日

  Adapting composites 3D printing to evolving needs

  Continuous fiber printing pioneer increases print cell options, size, hybridization and simulation capability for…

  45

  2 条评论
• Speeding RTM with heat-flux sensors

  2021年7月15日

  Speeding RTM with heat-flux sensors

  Clean Sky 2 INNOTOOL 4.0 project advances cure monitoring for larger and less costly lightweight landing gear made…

  47

  4 条评论
• Reprocessable, repairable and recyclable epoxy resins for composites

  2021年5月26日

  Reprocessable, repairable and recyclable epoxy resins for composites

  CIDETEC has patented thermo-mechanically reprocessable epoxy resins and composites based on the exchange of aromatic…

  37

  1 条评论
• STELIA Aerospace Composites advances hydrogen storage

  2021年5月17日

  STELIA Aerospace Composites advances hydrogen storage

  Airbus subsidiary converts aero experience into industry-leading storage efficiency for fuel cell vehicles. Read the…

  66

  3 条评论
• Z-direction composite properties on an affordable, industrial scale

  2021年5月3日

  Z-direction composite properties on an affordable, industrial scale

  Boston Materials uses milled reclaimed carbon fibers to increase modulus, impact/delamination resistance and produce…

  41
• Combining AC and DC dielectric measurements for cure monitoring of composites

  2021年4月22日

  Combining AC and DC dielectric measurements for cure monitoring of composites

  Lambient Technologies advances dielectric analysis (DEA) for more reliable, affordable composites manufacturing. "Both…

  16

Show more

See all articles