Bolted Glass Fused Steel Tanks For Digester
Center Enamel is the leading Bolted glass-fused-to-steel tanks manufacturer and Supplier in China
Center Enamel is the leading?Bolted glass-fused-to-steel tanks manufacturer?and Supplier in China. Glass-fused-to-steel tanks have found very wide applications in the water and wastewater treatment industry. In wastewater treatment, the sectional tank systems are used as clarifiers, shells, filters, contact tanks, thickeners, reservoirs and standpipes. In the waste treatment industry, they are used as aeration tanks, clarifier shells, trickling filters, anaerobic digesters (tanks and/or covers), gasholders, odor control units, biosolids storage and flow equalization.
Anaerobic digestion produces large amounts of biogas, including methane and carbon dioxide. The cleaned methane fraction can be stored, pressurized and used to generate on-site electricity and heat, and the excess energy can be fed into the grid or used to power equipment and vehicles. The digestion by-products of this method can be easily and safely used as commercial organic compost or fertilizer.
Anaerobic digestion is not a new technology, but in the past 15 years, anaerobic digestion has been standardized and improved through extensive use and development in European (especially Germany) and British industries.
Biogas storage tank is also called biogas holder and is a kind of Anaerobic digestion tanks which are often cone shaped and supported at the centre with a single pole. The outer layer of membrane roof works as the protection for the inner membrane . The outer membrane is more strong and coated with UV resistance coating . Outer membrane can be against static electricity, ultraviolet radiation and aging. Inner coat can be against biogas leakage.
Glass Fused to Steel Bolted Biogas Storage Tank Specifications
领英推荐
Coating colordark blue, dark green, white, and customizedA standard steel plate sizeeffective size 2400mm x 1200 mSteel plates thickness3mm - 12mm, depends on the diameter & heightCoating thickness0.25mm - 0.4mm, two coatings internal and externalAcid and alkalinity proofstandard coating suits for PH3 - PH11, special coating suits for PH1 - PH14Adhesion3,450N/cmElasticsame as steel sheet, around 500KN/mmHardness6.0 MohsService life>30 yearsSpark test>1500 VPermeabilitygas and liquid impermeableEasy yo cleansmooth, glossy, inert, anti-adhesionCorrosion resistanceexcellent! Suitable for wastewater salt water, seawater, high sulfur crude oil,
salt fox, organic and inorganic compounds
About Center Enamel Co., Ltd
Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2020, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 90 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition
Stainless Steel Bolted Tanks?Glass Lined Steel Tanks?Bolted Steel Tanks?Biogas Tanks?Drinking Water Tanks?Agricultural Water Tanks?Dry Bulk Storage Tanks?Potable Water Tanks?Process Water Tanks?Wastewater Tanks?Anaerobic Digesters?Leachate Tanks?Municipal Sewage Tanks?Fire Water Tanks?Industrial Water Tanks?Grain Storage Silos?Agricultural Silos?Liquid Storage Tanks?Fire Sprinkler Water Tanks?Industrial Liquid Tanks?China Storage Tanks Manufacturer?China Stainless Steel Water Tanks Manufacturer.