BMS  20A  between cells !
high efficiency transformer @ 70kHz 20A Li-ion BMS

BMS 20A between cells !

We've been working here at pwrtrnx while the world battles some real problems.

Solving the smaller problem of shifting real power all the way through a string of high current Li-Fe-PO4 cells.

Aimed initially at 48V ( 16 cell ) systems, we have standard solutions to move, 10, 20 or 30A DC* from any cell to any other cell (300mV cell differential*).

Oh, we measure cell volts & temp too. Auto start, auto stop, alarm signalling and simple display.

Lots of companies are making lots of higher power Li-ion batteries from all sorts of cell arrangements - we can keep those babies in line - when loads are demanding high currents and later when chargers are in-putting high currents.

for more information, technology transfer: sales@pwrtrnx.com


Justen B.

electronics engineer

10 个月

I would like more info

赞
回复
Nikos Vandoros

Power Electronics Engineer

10 个月

What is the end voltage difference between cells and what is the balancing current when the voltage difference is at the low tens of mV (<30mV) range?

赞
回复

要查看或添加评论,请登录

Colin J. Tuck ( Snr VP Global Corporate Engineering )的更多文章

  • Can a real transformer/choke be designed that just works ?

    Can a real transformer/choke be designed that just works ?

    We get asked this essential question all the time - how do I design a magnetic that will work - i.e.

    6 条评论
  • Odballs we're tasked to design - ignition for points vehicles !

    Odballs we're tasked to design - ignition for points vehicles !

    Looking over our stack of IP and know how that we have accumulated, one or two things stand out from the common-place…

    2 条评论
  • The big gap in power electronics design:

    The big gap in power electronics design:

    he big gap that exists in PE design - that relates to prox effect & skin effect - is that, as yet, one cannot enter the…

    11 条评论
  • Higher power bi-dir converters for B2B systems

    Higher power bi-dir converters for B2B systems

    Preston Consulting Ltd has developed new bi-directional converters for the battery to battery, B2B, sector, in the…

    8 条评论
  • My phase shift full bridge gets pretty hot ! - even at light loads - what's going on ?

    My phase shift full bridge gets pretty hot ! - even at light loads - what's going on ?

    We see a lot of interesting designs of the phase shift converter, pcb's with very interesting layouts, very interesting…

    23 条评论
  • How to make a low loss push pull - that works !

    How to make a low loss push pull - that works !

    Above is possibly the simplest moderately efficient 48VDC to 12VDC ( 20A full load ) isolated converter you could make.…

    8 条评论
  • Sun setting on your power electronics project ?

    Sun setting on your power electronics project ?

    Make 2025 the year of the rising Phoenix with expert intellectual property assist - - hands on assist - and more from…

  • Limited boost in a DAB

    Limited boost in a DAB

    Shown above are the classic wave-forms for the isolated DAB in boost. One can see the sharply rising current as the…

    1 条评论
  • Help - I need to boost Vout, 25kW both ways ! ( efficiently )

    Help - I need to boost Vout, 25kW both ways ! ( efficiently )

    Here is a common conundrum in the world of electrification: We want to charge a battery from a bus - here 800V, and…

    24 条评论
  • More audio fun -> 300W 4 ohm, 200W 8 ohm

    More audio fun -> 300W 4 ohm, 200W 8 ohm

    from our design archives - the G class audio amp - designed to be as efficient as possible for a pseudo class AB…

    1 条评论

社区洞察

其他会员也浏览了