Binder of RHF briquette dezincification!

#RHFbriquettebinder #steeldustbriquettebinderforRHFdezincificatoin #RHFcoldpressbriquettebinder #rotaryhearthfurnacebriquettebinder #rotaryhearthfurnacebinder #zincbearingdustbriquettebinder #dustbriquetteforRHFbinder #rotaryhearthfurnace #RHFproduction #steedustbriquettebinder

With the rapid development of the steel industry, the treatment of zinc-containing dust from steel plants has become increasingly prominent. This type of waste not only contains a large amount of valuable metal elements, but also may have an adverse effect on the ironmaking process due to its high zinc content. To this end, we have launched a dezincification dust cold press briquette binder for rotary hearth furnaces designed specifically for zinc-containing dust from steel plants, providing steel plants with an efficient and environmentally friendly solution.

1. Strong professionalism: tailor-made, excellent results

This binder is designed specifically for zinc-containing dust from steel plants, and its high viscosity ensures a high standard for briquette forming rate. The formed cold press briquettes not only have high cold and hot strength, but also show excellent reducibility. Its high dezincification rate and metallization rate enable the metallized briquettes to meet the requirements of returning to the blast furnace for ironmaking, effectively avoiding problems such as in-furnace distillation and tuyere warping caused by the circulation and enrichment of zinc, thereby maintaining the stability of the furnace top temperature.

2. Easy to use: mixing, stirring, and forming, all in one go

It is very simple to use this binder. Just mix the zinc-containing dust and the binder in proportion, add an appropriate amount of water and stir evenly, and then cold press molding can be carried out. The whole process does not require complex equipment, the operation is simple and easy, and the work efficiency is greatly improved.

3. Anti-calcium oxide: Enhance stability and resist cracking

The special ingredients in the binder can combine with the calcium oxide in the zinc-containing dust to effectively resist the cracking, disintegration and pulverization caused by calcium oxide. This feature significantly improves the wet strength and cold strength of the briquettes, ensuring the stability of the briquettes in the subsequent processing process.

4. Reduce costs: small investment, big returns

The addition amount of this binder is small and the bonding force is strong, making the cold press molding process simple and efficient. At the same time, due to the small investment in equipment, the production cost has been effectively reduced. This efficient economy enables steel mills to achieve greater economic benefits when handling zinc-containing dust ash.

5. Good use effect: efficient output, excellent quality

Using this binder, 25-50 tons of briquettes can be produced per ton of zinc-containing dust, with a molding rate of up to 98%. The dry cold strength of the briquettes after forming reaches more than 80kg without any cracking. This excellent use effect not only improves the quality of the briquettes, but also brings higher production benefits to the steel mill.

In short, our binder is an ideal choice for steel mills to deal with zinc-containing dust. Its professionalism, ease of use, calcium oxide resistance, cost-effectiveness and excellent use effect make it have a wide range of application prospects in the steel industry. We look forward to working with you to jointly promote the green and sustainable development of the steel industry.

[email protected]