BEWARE DURING GRINDING OPERATIONS!

1 jewellery, loose clothes , hand-gloves and  long hair It can be caught in moving parts. 

2. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

3. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

4.wear safety glasses, face shield, protective gloves, appropriate protective clothing, hard hat, steel toe boots and hearing protection , and dust mask if necessary. Keep other personnel  away while operating power tools.

5. use proper guard with grinding wheel, it protects operator from broken wheel fragments.

6.First of all  switch on and only present  the tool to the workpiece once it is running.

7.Wheels and other accessories running over speed can fly apart and cause injury. Use at least “max. 80m/s”.

8. use with the side handle installed and keep both hands on the tool at all times during use.

9.Ensure that sparks produced during work do not constitute a risk to the user or other workers and are not able to ignite inflammable substances. Endangered areas must be protected with flame-resistant covers. Make sure that fire-risk areas are always provided with suitable fire extinguishers.

10.perform test run after every tool change, ensuring that you are holding the angle grinder firmly with both hands. Hold the angle grinder away from your body. Ensure that there is no-person present in the area at risk. ……………………………………………………………Etc.