The Baylift Wheelie Bin Platform Lift
Martin Hancock
Joint Managing Director at Manual Handling Solutions; Goods Lifts, Mezzanine Goods Lifts
The Baylift Wheelie Bin Platform Lift from Manual Handling Solutions with maximum working load 500kg, Travel Height 1745mm, fully enclosed in a self-supporting mesh shaft. The platform will be 1900mm x 1220mm and guarded by a fixed hand rail to the two non-loading sides. The loading edge at the lower level will be fitted with a folding toe to act as a ramp while loading and an anti roll off protection while the lift is in transit. At the entrance to the lift at both levels there will be 2000mm high gates which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level; the gates will have bespoke hinges to allow the gates to fold back 180°. A 20 amp, 240 volt, single-phase supply is required terminated in a double pole switch at the lower level. Control is via a hold to run, push button stations adjacent to the gates at both levels. For a quotation please contact Manual Handling Solutions Tel 01553811977.
https://goodslift.website/bin-lift-platform-bay-lift-500kg-swl/
