BAMTEC? reinforcement as top reinforcement layer - top solution from A-Z
BAMTEC Reinforcement Technology. Roll-it!
The most advanced solution for rolled reinforcement: adding value to rebar - from fabrication to installation
Ideal for use on element slabs or steel composite slabs. Easy to produce - fast to install - material efficient - increased quality.
The BAMTEC? elements contain the basic reinforcement bars and the additional bars of one direction of one layer. Therefore, two BAMTEC? elements are rolled out in X and Y direction for a top layer. Because the bars lie like steel rods in one layer, the two layers do not add up.
The concrete cover of the upper layers is exactly maintained at every point. This is in complete contrast to the use of reinforcing steel mesh. When these are placed, 3 layers and multiple reinforcement joints are created. Especially on precast elements with lattice girders of the same height in all areas as spacers for the upper layers, this often means that the concrete cover can no longer be maintained. This is especially the case when additional bars are required. Thanks to the much larger coverage and accurate fit of the BAMTEC? elements, there are far fewer joints and no waste. Up to 20% material is saved compared to mesh and is therefore much more environmentally friendly.
The BAMTEC? carpets are produced largely automated with BAMTEC? Evolution Twin MMR. Production is off coil from 6-20mm and guarantees complete flexibility and leads to a highly material efficient production.
Project: Airport Zurich Switzerland - Extension / 950 tons of BAMTEC?
BAMTEC? supplier: Locher Bewehrungen AG, St. Gallen - Switzerland
www locherbewehrungen.ch
Check our Youtube-Channel: "Rolled Reinforcement. Roll-it"
Contact: Miles Johnson / Head of Business Development / [email protected]
www.bamtec.com