Automatic Polymer Preparation Unit

The #Benenv #flocculent / #Polymer preparation and dosing system, is an automatic continuous process, dedicated for the preparation of chemicals used in the #water and #wastewater treatment. The chemical dosing unit dissolve dry chemical / polymer powder or the flocculant dosing system can be customized to dilute concentrated solutions. The polymer dosing system is generally made from SS304, and the chemical dosing equipment/polymer feed system from SS316 or HDPE for low pH and special chemicals.

The Automatic Polymer Preparation Unit Working Process:

The chemical dosing system Controlled by the electrical panel, the Powder Dosing system can run in Automatic or manual mode. In Automatic cycle, when the level of the solution is low, and the chemical dosing unit rotary sensor of the powder detect a full hopper, the water solenoid valve is activated and the powder feeding system starts, leading to pre-mixing in a cyclonic movement before entering the first mixing tank.

The #flocculant dosing system tank is divided into three compartment: mixing tank, maturation tank, and service tank. Each one has its own mixing device, to assure total dissolution of the chemical powder.

The powder dosing system mixers are in continuous stirring action in order to assure the polymer dosing homogenous solution before delivery. The chemical dosing or polymer pumping system is easily connected to the chemical dosing unit, with special protection from dry run. The polymer dosing system provided continuous ready solution.