Ashkin Outlines LEED Measuring & Cleaning Performance Testing Protocols

News Release

For Immediate Release

Ashkin Outlines LEED Measuring & Cleaning Performance Testing Protocols

Due to the pandemic, we need much more objective, scientifically based surface testing systems to ensure facility cleaning effectiveness.

Channel Islands Harbor, CA – February 8, 2022 - Historically, cleaning performance has been based on meeting contractual task and frequency requirements, with actual performance measured solely on visual inspection.

?However, according to Steve Ashkin, Green Cleaning expert and one of the professional cleaning industry’s key influencers, this procedure has never been viewed as highly effective.?

“And now, due to the coronavirus pandemic, both the cleaning industry and our customers are reminded of the need for more objective measurements of cleaning performance.”

Fortunately, it’s now possible with the development of inexpensive ATP (adenosine triphosphate) meters and the lessons-learned from their use in healthcare, food, and pharmaceutical manufacturing.

“Now is the time to employ this testing technology in office buildings, schools, long-term care facilities - wherever there is critical concern about the health and safety of building occupants.”

However, Ashkin says that these systems must be used appropriately to ensure reliable, repeatable, and reportable results. To do so requires following the protocols established by the US Green Building Council. This includes the following:

Identifying

Identifying areas in a facility such as high-touch surfaces, spaces, and “space types” that need to be assessed using ATP monitors. Be aware that not all surfaces and spaces in a building present a high or substantial risk of pathogen transmission.

Prioritizing & Evaluating

Once identified, the next step is to determine how frequently these areas must be tested and evaluated.

“This allows cleaning professionals to concentrate their [cleaning] efforts where the risk of cross-contamination is highest. Normally, this is based on heavily used areas and surfaces, touched by multiple people throughout the day.”

?Specifying

Even in those areas heavily used in a facility, certain surfaces may present higher or lower contamination risks. Higher risk surfaces – tabletops, microwave controls, conference tables in high-use conference rooms, food preparation surfaces, restroom faucet handles and flush valves - may need daily ATP testing to measure cleaning performance, while other areas need less testing.

“Specifying standardizes testing to help maximize the benefits of the analysis while minimizing cleaning and testing times and cost of swabs.”

Randomizing?

While testing of high-touch surfaces and frequently used spaces is crucial, we cannot ignore less critical surfaces and spaces. To ensure overall cleaning effectiveness, conduct a limited number of tests on randomly selected surfaces or spaces throughout the month. This helps ensure overall cleaning effectiveness.

Analyzing?

Analyze all data collected to quantify and determine if some surfaces or spaces need more or less attention, where there may be systemic problems, or where different cleaning products, equipment, or solutions may be necessary.

“This last step is essential. View it as the feedback cleaning professionals, and all facility stakeholders, need to ensure their facilities are clean, safe, and healthy.”?

?Further, adds Ashkin, once a baseline of cleaning performance is established, “it may be possible to pre-determine if cleaning is even required on certain days. This will help focus [cleaning] energy and resources to those areas that need thorough cleaning the most.”

?Ashkin Headshot

Ashkin Group Logo

?###

?About The Ashkin Group and Stephen Ashkin

The Ashkin Group, LLC, is an internationally recognized consulting firm working to Green the professional cleaning industry. Their expertise is utilized by governments, policy makers, advocates, building owners, property management companies, labor unions, trade and professional associations, manufacturers, service providers, and janitorial product distributors worldwide.

Stephen P. Ashkin, founder of The Ashkin Group, is known as the Father of Green Cleaning. An author and a frequent public speaker, Steve’s commitment to Green Cleaning is more than a business: it is a passion, a calling, a mission in life—to transform the professional cleaning industry.

Contact Information

Stephen Ashkin

Email: [email protected]