ASENWARE 2 wired conventional smoke detector
conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. Provide open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Photo-electric
Work voltage: 9-28 VDC
Entrance LED output
Certificate: LPCB approved