Applied physics
Journal EEJET
All articles in open access journal which are indexed by Scopus (H-INDEX 36, SJR 0.288, SNIP 0.573)
Determining the effect of laboratory testing conditions on working parameters of the ST-25 hall thruster
The object of this study is the ST-25 Hall thruster with limited discharge power, no more than 200?W, designed by Flight Control LLC (Ukraine). The problem that was solved in the current paper was to determine the effect of residual gas pressure in vacuum chambers on the operating parameters of the Hall thruster. To solve this task, the operating parameters of the ST-25 thruster were determined, which was tested in three vacuum chambers with different sizes of residual pressure. Read more
Determining the effect of non-condensable gas on a two-phase ammonia heat transfer loop of the satellite
It is advisable to design thermal management systems for high-power stationary satellites and specific ground applications using two-phase mechanically pumped loops with ammonia as the coolant. During prolonged operation in orbit, the accumulation of non-condensable gases can occur due to radiolysis and chemical reactions. The issues related to the effect of non-condensing gas on system parameters and performance have not yet received sufficient attention. Read more
Construction of the mathematical model of magnetic transmission for an autonomous wind power plant
The object of research is electromagnetic and mechanical processes in magnetic transmission for an autonomous wind power plant of small power. The use of magnetic transmission as part of an autonomous wind power plant makes it possible to improve the reliability and efficiency of such a system. In the current work, a study of magnetic transmission as part of an autonomous wind power plant was carried out to investigate the parameters and characteristics of magnetic transmission. Read more
领英推荐
Finding an analytical solution for the cylinder’s fluxmetric demagnetizing factor using spherical harmonics
The work examines an analytical solution for calculating the fluxmetric demagnetizing factor of cylindrical magnets at large values of magnetic susceptibility and an arbitrary value of elongation. The application of the analytical solution for calculating the demagnetizing factor significantly simplifies the modeling and calculation of magnetic characteristics of cylindrical technical objects. A simplified analytical model of the scalar potential of the magnetic field of a cylinder with infinite magnetic favorability, inductively magnetized in a uniform magnetic field, was constructed using an approximate representation of the distribution of fictitious magnetic charges on its surface. Read more
Devising a technique for assessing the accuracy of measuring electric motor torque
The object of this study is a technique for assessing the accuracy of measuring the torques of electric motors. This technique is based on the improvement of dynamic torque measurement processes under transient operating modes. Special attention was paid to devising adaptive methods to normalize the output signal, which take into account vibrations and nonlinearities of the measuring channel. In order to improve the accuracy of measurements under conditions when the controlled parameter has different deviations from its average value, a technique for integrating time measurement intervals was proposed. That has made it possible to generalize parameter fluctuations, providing more stable measurement results. Read more
If you need assistance or advice, we are always happy to help!
Contacts of the publishing house PC ТЕСHNOLOGY СЕNTЕR: