Application of SAWL pipe

Specification:

1. Out diameter: 406.4mm - 1422.4mm (16"-56")

2. Thickness: 9.5mm-50mm

3. Length: 6m-12.5m

4. Type: LSAW (Longitudinal Submerged-Arc Welded), DSAW (Double Submerged-arc welded) Steel Pipe

5. Manufacturing Process: UO(UOE), RB(RBE), JCO(JCOE,COE)

6. Standard: API SPEC 5L (ISO 3183), GB/T 9711.1, GB/T 9711.2, GB/T 9711.3

7. Uses: for conveying gas, water and oil, in the oil or natural gas industries

8. Chemical Analysis (%):

9. Mechanical Properties:

Water pipeline

SAW (LSAW/SAWL) STEEL PIPE, WATER PIPELINE

By carrying out standard Non-Destructive Detection on our LSAW pipes, we ensure that our pipes serve our customers well. Our LSAW steel pipes are ideal pipes for large-scale pipeline engineering, petroleum, water or natural gas transportation and urban pipe network construction and piling.

Process:

LSAW (Longitudinal Submerge-arc Welded), UO(UOE), RB(RBE), JCO(JCOE)

DSAW (Double Submerged arc welded)

Quality Standards:

API 5L Line Pipe for oil and gas

ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

DIN 2458 WELDED STEEL PIPES AND TUBES

EN10210 Hot finished structural hollow sections of non-alloy and fine grain steels

EN10219 Cold formed welded structural hollow sections of non-alloy and fine grain steels

GB/T3091 Welded steel pipe for low pressure liquid delivery and construction

GB/T9711 Petroleum and natural gas industries--Steel pipe for pipelines

Steel Grade:

API 5L PSL1 & PSL2: GR.A, GR.B, X42, X46, X52, X56, X60, X65 X70

EN10219/DN10210: S235, S235JR, S235J2H, S275, S275JR, S355JRH, S355J2H

ASTM A53: GR.A, GR.B

ASTM A252: GR.1, GR.2, GR.3

ASTM A500: GR.A, GR.B, GR.C, GR.D

GB/T9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555

GB/T3091, SY/T5037: Q195, Q215, Q235, Q275, Q295, Q345

Coating Standard:

ANSI/AWWA C104/A21.4 American National Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water

ISO 21809: Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems

DIN 30670: Polyethylene coatings of steel pipes and fittings

AWWA C210: Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings

AWWA C213: Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines

Size:

Outer Diameter: 406.4mm-1422mm(16”-56”)

Wall Thickness: 9.5mm-50mm

Length: 6mtr-12.5mtr

End:Plain/square ends (straight cut, saw cut, and torch cut), or Beveled ends

Surface: Lightly oiled, Hot dip galvanized, Black painted, Varnish coating/Anti rust oil, Protective Coatings (Epoxy, Fusion Bond Epoxy, 3-layers PE)

Supply ability:10,000 Metric Tons/Month

Delivery time:7 day at fastest, based on total quantity or as customers’ requirements

Loading port:Tianjin(Xingang) Port or Shanghai port

Payment Term:T/T, L/C at sight or negotiate

Construction & Structural Pipe

Size & Thickness

Piling Pipe

Testing Requirements for seamless and welded A252 steel piling pipe

(1) Hydrostatic Testing:Not specified.

(2) Mechanical Tests: Tensile Test: Either longitudinal or transverse at option of manufacturer.

(3) Number of Tests:One tensile test per 200 lengths.

Permissible Variations for A252 steel piling pipe

(1) Wall thickness: Not more than 12.5% under the nominal wall thickness specified.

(2) Weights per foot: Each length of pipe pile shall be weighed separately and its weight shall not vary more than 15 % over or 5 % under its theoretical weight, calculated using its length and its weight per unit length.

(3) Outside diameter: Shall not vary more than plus or minus 1% from the diameter specified.

Lengths of A252 steel piling pipe

Pipe piles shall be furnished in single random lengths,double random lengths, or in uniform lengths as specified in the purchase order, in accordance with the following limits:

(1) Single random lengths: 16ft to 25ft inclusive (4.88 to 7.62 m)

(2) Double random lengths: Over 25ft (7.62m) with a minimum average of 35ft (10.67m)

(3) Uniform lengths: as specified length with a permissible variation of plus or minus 1 inch

Ends:

Pipe piles shall be furnished with plain ends. Unless otherwise specified, pipe piles shall have either flame–cut or machine–cut ends, with the burrs at the ends removed. Where ends are specified to be beveled, they shall be beveled to an angle of 30° (+5°, ?0°), measured from a line drawn perpendicular to the axis of the pipe pile.