Antenna PCB circuit board

The 2.4G built-in board antenna, antenna, and circuit parts are directly made on the same antenna PCB circuit board. This approach has no antenna cost for mass production, and the antenna has good consistency and stability.

But for NB-IoT antennas, can you also use this method to implement the built-in antenna? The answer is that the onboard antenna is perfectly suitable for NBIOT antenna scenarios. However, compared with the 2.4G onboard antenna, its design is much more difficult.

We know that the operating frequency band of the NB-IoT antenna is lower than 1GHz whether it is a moving B8 or a telecommunication B5. This means you need to reserve enough antenna space for the NB-IoT antenna. Because only enough antenna space can guarantee the performance of this low-frequency antenna.

The antenna in this band is more susceptible to the environmental impact of the antenna. For this antenna, a professional and rigorous design is required. Therefore, the NB-IoT antenna needs a special design, so it is impossible to find any package to meet the requirements.

In addition, the design of NB-IoT antenna involves many design points of RF circuit and antenna matching network, which need professional guidance to meet the design requirements.

The advantages of the NB-IoT antenna PCB board are obvious, which can not only greatly reduce the cost of production, but also greatly improve the consistency and stability of the antenna.

iPCB.com specializes in the design, development, and sale of various antenna PCB boards. If you have NB-IoT onboard antenna PCB boards that need to be manufactured, please contact us.