Is There An Air Source Heat Pump with High Water Temperature?

Generally, the water for bathing in winter is 40-45℃, the daily hot water for kitchen and bathroom is about 40℃, and the space heating is 30-75℃. The outlet water temperature required for space heating depends on the thermal insulation of the building and the heating system used.

?

If the building is well insulated and a new water floor heating system is adopted, the outlet water temperature of 30-40℃ can ensure the space heating effect. However, if the building's thermal insulation is poor and the heating system uses radiators for heating, it may require an outlet water temperature above 55℃.

?

The highest water outlet temperature of conventional R32 air to water heat pumps on the market is below 50℃-60℃. If the user's building insulation effect is not good and heating equipment above 60°C is required, it is difficult for the non-hybrid R32 air source heat pump to meet the user's needs.?Is there an air source heat pump with high water temperature?

?

Look here, POOL WORLD's R290 ECO Heat Series heat pump is also a multifunctional triple supply heat pump that can operate stably at -25°C. In the case of no electric auxiliary heating, due to the characteristics of R290 zero-carbon refrigerant and the technology of POOL WORLD, the maximum outlet temperature of the unit can reach 75°C!

According to EN14825:2022, the Average Climate Water Outlet at 35℃, its SCOP range is 4.60-4.70, ErP Level A+++, Seasonal Space Heating Energy Efficiency (ηs) is as high as 185.1%, it is the latest, most environmentally friendly and energy-efficient air to water heat pump on the market.

At the same time, the heat pump system is compatible with the smart grid system and photovoltaic system, and provides a variety of energy combinations for the unit, so that the heat pump unit can intelligently choose the cheapest energy solution according to the peak period of the smart grid.

For example, during the peak period of the power grid, the power to support the work of the heat pump comes from the power directly produced by the solar panel or the power of the energy storage system. During the non-peak period of the power grid, cheap power from the power grid is used. Ensure that the heat pump system can provide a 24-hour stable supply, and solve the problems of frequent power outages caused by the instability of the local power grid, resulting in the inability to provide heating guarantee in winter and the high cost of heating energy in winter.

In addition, POOL WORLD has newly added energy management functions to this heat pump. In addition to choosing a variety of operating modes, users can also customize to run in a certain mode during a certain period of time. They can also view daily/weekly/monthly energy consumption data and charts on the remote controller interface or in the APP, and then users can adjust the operation of the heat pump unit according to the home energy consumption. This function can realize high efficiency, low carbon and low cost operation of house heating cooling and domestic hot water heating.

About POOL WORLD

Guangzhou PoolWorld Environmental Technology Co., Ltd. is a manufacturer specializing in providing heat pump OEM/ODM services for the global HVAC industry.?

Heat pump OEM/ODM service, contact marketing center: [email protected]

LinkedIn company page:https://www.dhirubhai.net/company/pool-world-heat-pump/

Company website: https://www.poolworldheatpump.com/heating-cooling-dhw-heat-pump/r290-heat-pump/r290-full-dc-inverter-heat-pump.html