Air Cooled Water Chiller Introduction

Air Cooled Water Chiller

Specification:

1. Outlet temperature range: -10 C ~+35 deg C

2. Pump included

3. Stainless steel tank included

4. No need cooling tower, convenient for use.

5.Electric Power saving.

6.“V" Type Air Cooled finned condenser, with good heat exchange.

7.Micro-computer intelligent control system; SIEMENS PLC option.

8.Temperature automatic control no need operate by manual.

9. CE, UL, SGS certificate

10. No need to install a cooling tower Easy installation&Operation and maintenance

Water Chiller Control System

The chiller has developed a highly intelligent PLC and PC-level computer control system, which can be used for remote monitoring and control. Simple operation, connect with power supply directly, with lower failure, and high safety factor, easy installation. User can set the parameter as real working need, intuitive and reliable; SIEMENS PLC is workable.

Industrial Water Chiller Compressor

It adopt the world famous brand hermetic scroll type compressor, which can saving 20-30% energy than the reciprocating compressor. It's running more stably, reliably, with high efficiency, fewer failures, less vibration, lower noise and easy maintenance. The compressors can automatically running alternately according to the load change, to balance the running speed of each compressor, and greatly extend the service life of the chiller.

Heat Exchanger -Evaporator

(1). Tank with coil: If customer will connect with a closed water loop;

(2). Shell and tube: If customer will connect with a open water loop;

(3). It adopts internal and external threaded tubes, the inner surface of the copper tube is threaded and surface is smooth, the cooling efficiency is higher. The outside of the evaporator is insulated with 25mm thick PE insulation board, no condensation, and small loss of cooling capacity.

Condenser

Equipped with high-efficiency transverse slit fins and internal threaded copper tubes, with high heat exchange efficiency and good stability.