AiPi-R286Box| WiFi6 smart screen solution by Ai-Thinker
Ai-Thinker
Ai-Thinker focuses on IoT module, antenna, RF test, cloud and PCBA service, to provide customers with one-stop solution
Ai-Thinker had launched the AiPi-Eyes-R1/R2 development board, which the driver is a 4-inch RGB capacitive touch screen. And after our engineer discussion, they think to make an 86 Box like this below:
?
But finally finished, like this:
?
The AiPi-R286Box is based on AiPi-Eyes-R2, the open-source hardware series development board. As the hub of smart home devices, it has powerful processing capabilities and rich functions.
?
Overall structure：
The 86 box must be related to the 220V AC power. The circuit module of the board is roughly as follows:
AiPi-Eyes-R2 modification
Because there are pins on the board, the engineer directly removed the pins, and used flying leads for programming and debugging. This way you can install the shell directly.
?
?
86 Box is connected to the private cloud platform U-Bases Cloud, and the mobile control method of U-Bases Cloud requires downloading an App, so engineers generated an App through the U-Bases Cloud platform as well. You can access Ai-Thinker’s DOCS website to download it:
??
Distribution network:
When powering on for the first time, you need to configure the network, or click: "Start Configuration" on the network configuration interface of the 86 box to configure the network.
Control:
?
The 86 box's screen can control the lights on and off:
?
The lights can also be controlled on the APP, and the effect can be consistent with the UI response of 86:
?
Data acquisition: DOCS
Contact us: [email protected]