Adop France IBM molds in stock
We would like to inform you that we have in our possession 3 brand new ADOP France molds, completely finalized, sampled and fine-tuned ; the attached PDF shows the overall geometry of these bottles.
Technical details are below ;?
6 cavity, 350ml HDPE bottle mold + spare parts
Cycle time ; 18 seconds
Base insert ; can be a design proposal of your choice for confirmation by Adop
Neck feature & height ; can be a design proposal of your choice for confirmation by Adop
Neck ID ; An alternative neck ID can be put to Adop for validation
?
8 cavity, 200ml HDPE bottle mold + 8 cavity blow mold version (for assembly to mold frame) + spare parts
Cycle time ; 18 seconds
Base insert ; can be a design proposal of your choice for confirmation by Adop
Neck feature & height ; can be a design proposal of your choice for confirmation by Adop
Neck ID ; An alternative neck ID can be put to Adop for validation
领英推荐
?
16 cavity 50ml HDPE bottle mold + spare parts
Cycle time ; 14 seconds
Base insert ; can be a design proposal of your choice for confirmation by Adop
Neck feature & height ; can be a design proposal of your choice for confirmation by Adop
Neck ID ; An alternative neck ID can be put to Adop for validation
?These 6 & 8 cavity molds have been conceived initially for a Jomar 85S minimum, and the 16 cavity for a Jomar 135,?but will also produce on other IBM machines of similar size and capacity after slight adaptations depending on the machine to be used.
?Depending on the neck and base requirements, these molds could be delivered in 6 to 8 weeks maximum.
Samples of the parts can be sent to you (excluding the base and neck which shall be withdrawn from the parts before shipment) for review.
?Feel free to let me know if either model could be of interest to you, send me your requirements regarding the base and neck features and I shall draw up our offer with these optimized lead times, once we’ve reviewed the feasibility. [email protected] or 0033 6 49352783
?