7 Considerations during Metal 3D Printing

With the extensive application?of additive manufacturing 3D printers,?metal 3D printing, as a new manufacturing technology, is being recognized by numbers of enterprises. Metal 3D printing has the advantages of fast forming, high precision and high material utilization rate, and is widely used in aerospace, automobile, medical fields. As the technology is being widely applied, here are 7 factors should be taken into consideration during metal 3D printing.

• Material Selection

Different metal materials have different properties?and performance?during metal 3D printing, so it is necessary to choose the appropriate material according to the specification?needs. For example, titanium alloy requires?high-energy laser scanning?with high hardness, while nickel?alloy requires?low-power laser scanning. In addition, cost, reliability?and corrosion resistance need to be considered when selecting materials.

• Design Optimization

Before metal 3D printing, the?design needs to be optimized to ensure the best performance during metal printing. For example, when designing, it is necessary to avoid overhanging structures, extra less-/small support structure, which?will affect the printing quality and material utilization.

• Heating Control

As metal 3D printing needs to be processed?at high temperature, the heating needs to be tightly controlled to ensure that the material can be melted evenly. Heating control includes the selection of heating source, the setting of heating parameters?and the control of heating time, etc., which need to be optimized according to specific conditions.

• Gas?Control

Inert gases such as argon or nitrogen?are required during?metal 3D printing?to reduce the risk of contamination or oxidation of the material. At the same time, the gas?needs to be strictly controlled to ensure that the gas condition remains stable throughout the printing process.

• Scan Speed & Power Control

In the process of laser scanning, the scanning speed and power need to be carefully controlled to ensure the printing quality and material utilization. Generally speaking, lower scanning speeds can improve print quality but print time and cost?will be increased; higher scanning speed can quickly complete the printing, but it may affect the print quality.

• Support Structure Design

Currently, most metal 3D printing requires support structures to support the transition areas and overhangs to ensure that the product can be successfully printed. The rationality of the support structure design has a great influence on the printing quality and material utilization.?Designers?should highly take notice of it.

• Post-processing Control

After metal 3D printing is completed, a series of post-processing?process?is required, which include support structures?removing, product polishing?and spraying, etc. These post-processing need to be strictly controlled to ensure that the final product meets the printing requirements.

In short,?during metal 3D printing, we need to pay attention to the above matters?with?fine operation and control,?so as to print?high-quality, high-precision and high-reliability metal parts.

Eplus3D has decades of experience in AM especially MPBF.?If you have any question regards SLM 3D printing, feel free to?contact?us, we're more than happy to assist you?with our tailored metal AM solutions!