6/4E-AHR Slurry Pump for Copper Concentration Plant
Contact: Alice.Wong Email: [email protected]
Tobee? 6/4E-AHR Rubber Lined Slurry Pump?is cantilevered, horizontal, centrifugal with a double casing slurry pump. They are designed for the handling of highly abrasive, high-density slurries. The wet parts of 6x4 slurry pumps are made of natural rubber, which could be replaceable wear-resistant parts. The discharge side can be oriented to any of the eight different positions. The shaft seals may adopt a packing gland seal, expeller seal and mechanical seal.
Tobee? Heavy-Duty Slurry Pump Transmission Options:
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZV Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of the motor onto the bearing support, this method helps save installation space.
CR Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Tobee? Heavy-Duty Slurry Pumps Shaft Seal Arrangement:
? Packing Seal is a general shaft seal. It applies to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high-temperature conditions. Using ceramic shaft sleeve, For high abrasion conditions, The ceramic shaft sleeve is available.
? Expeller Seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Expeller seal can be used on the single-stage pump when the positive pressure of the pump inlet is no more than 10% of the pump outlet pressure or on the first-stage pump in the pump series.
? Mechanical Seal is an advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition, So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions.
Tobee? 6/4E-AHR Rubber Lined Slurry Pump? is wildly used on Iron Ore Dressing Plant, Copper Concentration Plant, Gold Mine Concentration Plant, Molybdenum Concentration Plant, Potash Fertilizer Plant, Other Mineral Processing Plants, Alumina Industry, Coal Washery, Power Plant, Sand Excavation, Building Material Industry, Chemical Industry and Other industries