5 Must-Have Characteristics of Great Force Equipment
Morehouse Instrument Company
We create a safer world by helping companies improve their force and torque measurements.
5 Must-Have Characteristics of Great Force Equipment
Equipment used to measure force is going to be made to minimize off-center loading, bending, and torsion.??To do this force, machines need to be:
All of the machines shown are designed with these 5 things in mind. Equipment used to measure force must replicate how most instruments are used in the field.
Equipment used to measure force - Plumb Deadweight Example
Morehouse 1,000 lbf automated deadweight machine that is plumb. In this machine, the weights hang in a vertical direction and if they are out of plumb, they will introduce misalignment through the vertical line of force.
?Equipment used to measure force level UCM example
2. Level?- A device for establishing a horizontal line or plane by means of a bubble in a liquid that shows the adjustment to the horizontal by movement to the center of a slightly bowed glass tube
Morehouse 100,000 lbf UCM.?The upper and lower platen are?ground flat?and the adjustable feet allow the end-user to obtain a level condition.?If the level is not achieved, errors from misalignment will happen.
Equipment used to measure force - Square BCM Example
3. Square?- for Force Machines this is about having four right angles.
Morehouse 10,000 lbf Benchtop Machine.?The adjustable beam and bottom base form the 4 right angles.?This reduces the chance of misalignment.?The bottom screw is aligned to the top beam to keep the line of force as plumb as possible.
Equipment used to measure force - Rigid Morehouse USC-60k Scale Press Example
4. Rigid?– not flexible. If the loading surface starts to bend, all sorts of alignment errors can happen which will impact the results
Morehouse USC-60K With Reference Load and Morehouse 4215 Indicator – the top and bottom plates are reinforced to keep the machine from bending
?Equipment used to measure force - Low Torsion Morehouse PCM Example
5. Torsion?– the action of twisting or the state of being twisted. Free of torsion means free of being twisted when forces are applied
Morehouse PCM-2K With Reference Load Cell.?This machine has special bearings to keep things from twisting.?Before putting in the bearings, the measurement errors were higher than 0.1 %, when we added the bearings, the errors became less than 0.02 %, which is better than most transfer standard type machines.
Equipment used to measure force - NOT ALL EQUIPMENT REPLICATES FIELD USE! If you require different setups for compression and tension, this type of calibration setup may not replicate use. If you are using the load cell to switch between tension and compression in the same setup, the setup if the same adapters are used for calibration and field use would be okay.
Equipment used to measure force - EQUIPMENT THAT REPLICATES FIELD USE!
Equipment Used to Measure Force Must Replicates Field Use:
To Replicate Field Use for ASTM E4 & ISO 7500 Calibrations in These Types of Machines
What Makes Great Equipment Used To Measure Force - Conclusion
I take great pride in our knowledgeable team at Morehouse, who continue to work with everyone, clarify complex topics, and provide tools such as free guidance documents, excel sheets, and products to help you make better force measurements. We want to make sure everyone knows what makes great equipment used to measure force.
At Morehouse, we educate our customers and provide solutions to you. Most of these solutions are available for free to help you make better measurements and can be found?here.
We have been in business for over a century and focus on being the most recognized name in the force sensor calibration business. That vision comes from educating our customers on what matters most and having the proper discussions relating to what makes great equipment used to measure force.
Everything we do, we believe in changing how people think about force and torque calibration. We challenge the "just calibrate it" mentality by educating our customers on what matters, what causes significant errors, and how to focus on reducing them. In addition, Morehouse makes simple-to-use calibration products. We build excellent force equipment that is plumb, level, square, and rigid.
If you have more questions about what is a load cell, or other questions don't hesitate to get in touch with us @ 717-843-0081 to talk to a live person or email?[email protected]. Visit us on the web at mhforce.com.
#great equipment used to measure force
Want to learn more? Watch our video on what makes great equipment used to measure force.
To be notified of new videos subscribe to our Youtube channel here ?https://www.youtube.com/c/mhforcecalibration?sub_confirmation=1