4?? Use only the essential

Air is free. Compressed air is not. Use it wisely.

?? Use the correct size

? The right selection matters – The selectors

There are several types, sizes, and variations of cylinders, valves, and other automation components. There are off-the-shelf versions and custom designs available. Aware of the fact that the sheer number of choices can be overwhelming, we have developed a series of selectors to guide you, to ease your choice and to make sure you choose the exact size you need. No more.

? Keep an eye on the tubing & Minimize it where possible

Tube and fitting downsizing has an obvious direct impact on the air consumption, having a positive effect on air leaks and pressure loss as well. And, moreover, without having any impact on the cylinder’s speed. Tube length is often subject to misuse. Experience shows that in many applications, tubing length can be shortened by up to 50 % with no adverse effects.

?? Use components with an efficient design

? Compact cylinder with solenoid valve - CVQ Series

An integration of a compact cylinder and a valve which directly governs it. Without tubing connecting both elements.

Save 50% in your air consumption in a simple way.

? Vacuum pad with ejector - ZHP Series

The ejector and pad are integrated in a single vacuum generation unit. No tubes are used between the pad and ejector.

Ease your vacuum generation.

? Thermo-chiller - HRSH Series

This series includes a triple inverter. This technology adapts the refrigeration level to demand in real time avoiding any energy surplus. The inverter controls the number of motor rotations of the compressor, fan and pump depending on the heat load from the user′s equipment.

Cool down your costs.

?? Use vacuum wisely

? Vacuum saving valve - ZP2V Series

The suction is automatically switched off when there is no workpiece, which means a considerable reduction in the vacuum pressure loss. With ZP2V Series you can simply the control circuit with a unique ejector for multiple pads.

Automatically stops your consumption.

? Magnetic gripper - MHM-X6400 Serie

Magnetic gripper is capable of adsorbing a great variety of ferromagnetic pieces, with different geometries and properties, even in applications where vacuum pads or grippers are not performing efficiently. Thanks to its operating principle, MHM-X6400 removes the continuous blowing or suctioning that occurs when using a vacuum pad.

?? Use blowing wisely

? High efficiency nozzle - KNH Series

Maximize air blow efficiency thanks to a more focused blowing impact. There is a wide range to choose from, either installing in a blow gun or directly in a pipe. Governed by the Bernoulli effect, the air blow thrust can be improved by 10%.

? Air amplifier - ZH-X185 Series

A simple, easy-to-operate and smart solution that, thanks to the Coanda effects, multiplies air flow/air suction by 4 and 3 respectively. Save up to 70% in your air consumption with SMC′s Air Amplifier.

?? Use quality air

Contaminants such as oil, water condensation, and particles in general, reduce the service life of components since they accelerate abrasive wear, cause corrosion, and deteriorate the lubricants. Ultimately, poor-quality air circulating around your system can lead to important monetary losses.

Keeping the compressed air dried and filtered helps to increase machine availability and process reliability while reducing maintenance costs.

Good maintenance is carried out systematically, not “once in a while.” It ideally includes the inspection of filter and air preparation units, dew point pressure measurement and checking oil content in the air distribution lines.

?? Do not hesitate to invite SMC specialists to re-shape your future machines.