4 Considerations When Beginning a Porcelain Paver Installation

Due to their durability, versatility and sleek appearance, porcelain pavers are an extremely popular choice for outdoor spaces. Proper installation will ensure optimal performance and longevity. This guide will explore several essential considerations when installing porcelain pavers in residential or commercial outdoor projects — from surface preparation and material selection to proper drainage and maintenance tips.?

Considering these factors will help you to carry out successful projects that exceed all expectations.?

1. Proper Preparation?

Preparing for porcelain paver installation is essential. Assessing the installation site, preparing it accordingly and ensuring you have the proper installation tools can help make the installation process easier.?

Tools and Equipment

To install outdoor porcelain pavers, you will need:

• A tile saw designed for wet-cutting porcelain. These typically have diamond blades.
• Edge restraints to prevent pavers from shifting out of place.
• Fine-grained polymeric sand or exterior-grade grout to fill in joints.
• Spacers to ensure the pavers are at least 3/16 of an inch apart to enable drainage.
• Durable gloves and protective glasses for safety.
• Trowels and grout float (if you are installing pavers with mortar over concrete).

Site Assessment and Preparation

Proper preparation of the substrate is key.

Make sure this area is 6 to 8 inches larger or wider than the space to be covered by the pavers. Mark the perimeter of this area with marker posts and string.

To ensure that pavers can drain, placing them on a slight slope of 2 degrees is always advised, sloping towards areas where drainage is preferred like soil beds. However, the slope can vary depending on the site conditions.

Use a shovel to level the area and create the slope. The amount you’ll need to excavate will depend on the weight the pavers will bear and the soil conditions. Once soil is removed, the base should be compacted with a vibro compactor.

Place a geotextile sheet over the soil before your chosen sub-base layer (e.g., sand or gravel). If you are adding multiple layers, place a sheet between each to prevent the layers from mixing.?

2. Installation

Sub-base or Mortar Bed

Various options are available for the sub-base, which is the layer between the substrate and the pavers. The most common are sand, gravel and mortar over concrete.?

However, you may be able to lay pavers directly onto the grass for certain projects, like ones where the pavers will bear no more than the weight of pedestrians.

Sand or Gravel

If you want to install pavers over sand or gravel, place a geotextile fabric sheet over the soil and cover it with a sand or gravel layer between ? of an inch and 2 inches thick. If you use both, remember to place a separate sheet between the layers before compacting it with a vibro compactor.

Use a wooden or metal board to level the surface and ensure it has a slope of 2 degrees, angled away from building foundations.

Concrete

If you’ll be laying pavers over concrete, ensure that the reinforced concrete base meets relevant standards and codes.?

If the slab is small enough that it doesn’t require expansion joints, a minimum of 3/16-inch grout joint is needed. If the slab is larger and needs expansion joints, the grout joint must be at least ? of an inch. Pavers must not be laid across the joints.

Clean the surface of the concrete and spread the mortar evenly over the surface with a trowel.

Grass

To install pavers over grass, remove the grass and excavate the area to the depth of the pavers. Compact the soil, then lay the pavers directly on the soil. Alternatively, you can add a sand or gravel layer — first, excavate to a greater depth, then add a geotextile fabric sheet between the soil and pavers.

Laying the Pavers

Once the sub-base is compacted, begin laying the pavers. Never use a vibro compactor to compact the pavers, as this may damage them.

One important step in porcelain paver installation is to leave 3/16 of an inch spacing between each paver — you can use plastic spacers (ideally with a flat base) to help lay the pavers more evenly.??

If you are installing pavers over concrete, you can alternatively use rubber support pads.

Ensuring Installation Quality

You should also use a rubber mallet to gently but firmly tap each paver to ensure it doesn’t rock or shift.

Joint Filling and Sealing

You can use either polymeric sand (e.g., Gator Tile Sand, which is designed specifically for porcelain pavers) or grout to fill and seal joints between pavers.

Fill the joints with fine-grained polymeric sand after cleaning them out, then clear any excess sand from the surface of the pavers. You can then spray a mist of water (from a spray can rather than a hose, which can displace the sand due to high pressure) over the surface to cure the mixture.

Alternatively, you can fill the joints with an exterior-grade grout, and then wash any excess grout from the surface.?

3. Troubleshooting?

Common Issues and Solutions

Common issues with outdoor paver installations include:

• Uneven Pavers: To fix this issue, remove the pavers and compact the sub-base layer again.
• Shifting or Loose Pavers: This can be fixed by adding edge restraints and re-compacting the sub-base.
• Weeds Growing Between Pavers: This can often be resolved by filling the joints with polymeric sand between the joints.?
• Pooling Water: This is caused by inadequate surface slope. This issue may require the area to be regraded or drainage channels to be added.?

4. Maintenance and Care Needs

Routine Maintenance

Proper maintenance keeps pavers looking attractive and prevents issues. Regular sweeping of dirt, leaves, and other debris will help keep pavers clean and prevent staining. If any stains do appear, clean them quickly with soap and water — or use more specialized cleaners for tougher stains, such as oil.

Controlling weeds and moss is also important. You can do this with an appropriate weed killer or by using a pressure washer.

Long-Term Care Tips

To keep porcelain patios in top condition, you can periodically refill the joints with polymeric sand. This will also discourage weed growth, so you won’t need to spend as much time removing weeds.

Archatrak: Top-Quality Porcelain Pavers

At Archatrak, we provide outdoor porcelain pavers in various sizes, colors and visual effects — from wood to cobblestone. Their strength, scratch resistance, non-porous properties and versatility make them a great choice for both residential and commercial projects.?

If you plan on installing Archatrak porcelain pavers on balconies and rooftops, somewhat different installation techniques apply. For these projects, we supply adjustable height paver supports. These are placed under the pavers to achieve perfectly level surfaces, irrespective of the underlying slope of the roof or balcony.

For more information on our porcelain pavers, check out our extensive product range. If you have any other questions regarding installation best practices, our team is ready to help — contact us today!