3D Cylinderinspection

The detailed analysis of production process required highest resolution. The system is now available with 2000 x 2000 measuring points and 5x ... 100x objectives.

The white-light interferometry provides an z-resolution of 0.1 nm for all objectives and measuring point distances down to 0.07 μm using the 100x objective.

The high speed of data acquisition allows single scans in app. 2 s with an optional stitching of multiple scans in seconds.

The system can be used with an manual or motorized z-axis.

The software allows the calculation of roughness parameters.

Classical honing structures can be evaluated with specialsised extensions as the Honing Structure FFT Analysis:

Separated honing structures.

This allows the instant and separate analysis of honing angles and transport volume.

Folded metal structures can be analysed according to the Daimler factory norm.

New structures have to be classified after complete different methods.

Plug ins into MountainsMap allows the counting of pores. Last but not least is the fast measurement of larger areas with highest z- resolution necessary to check for poping up structures which can later falling out and cause some trouble with vertical running grooves which increase the oil consumption:

With the universal posibilities of the fast scanning of larger areas as well as highest resolutions for research and development GBS could win some leading companies as customers which has used competitive devices in the past. More information: