2000cd Red LED Solar power Type B Medium intensity obstruction lights for High Voltage Power Tower

Here’s an optimized version for your requirements:

2000cd Strobe Red LED Solar-Powered Medium-Intensity Type B Obstruction Light for High Voltage Power Towers

Key Features:

• Brightness: 2000cd output, ensuring visibility in all weather conditions.
• Lighting Mode: Red strobe, meeting ICAO & FAA standards for Type B medium-intensity obstruction lights.
• Power Source: Solar-powered with high-efficiency panels, designed for continuous operation and low maintenance.
• Battery Backup: Long-lasting lithium battery for up to 7-10 days of autonomy in low sunlight conditions.
• Durability: IP67-rated for water and dust resistance, ensuring longevity in extreme environments.
• Applications: High Voltage Power Towers, telecommunications masts, and other tall structures.
• Installation: Easy, tool-free mounting, and minimal wiring, suitable for remote locations.
• Energy Efficiency: Low power consumption with optimized solar charging circuitry.

Application of 2000cd Strobe Red LED Solar-Powered Obstruction Lights

This medium-intensity Type B obstruction light is designed to enhance safety by marking high structures for aerial and ground visibility. It is specifically tailored for:

1. High Voltage Power Towers
2. Telecommunication and Broadcast Masts
3. Wind Turbines
4. Industrial Chimneys and Smokestacks
5. Cranes and Construction Sites
6. Airports and Helipads
7. Bridges and Overpasses

Standards for 2000cd Strobe Red LED Solar-Powered Obstruction Lights

The 2000cd Medium-Intensity Type B Obstruction Lights comply with international and regional aviation safety standards. Below are the key standards they meet:

International Standards

ICAO (International Civil Aviation Organization):

• Annex 14, Volume I (Aerodrome Design and Operations): Medium-Intensity Type B: 2,000cd effective red flashing light. Required for marking structures from 45m to 150m height above ground level.

2. United States Standards

FAA (Federal Aviation Administration):

• Advisory Circular 150/5345-43J: Specification for Obstruction Lighting Equipment. Medium-Intensity Red Light (L-864): 2,000cd effective intensity, flashing at 20-40 flashes per minute.

3. European Standards

EASA (European Union Aviation Safety Agency):

• Aligns with ICAO Annex 14 for obstruction lighting requirements.

4. Local Standards (Country-Specific)

• Most countries adopt ICAO and FAA guidelines. Some may have additional requirements for environmental conditions (e.g., high temperatures, dust, or humidity).

5. Environmental Standards

Ingress Protection (IP):

• IP67 or higher for water and dust resistance.

IEC Standards (International Electrotechnical Commission):

• Compliance with IEC 60598-2-22 for luminaire safety and performance.

Battery & Solar Panel Standards:

• Solar panels adhere to IEC 61215 for durability and efficiency.
• Batteries comply with UN38.3 safety standards for transport and use.

Welcome to inquiry, Email: [email protected]