2 Scans. 30min. This was the result!!!

[Please like, comment, or share, if you find this information helpful. Also message me if you have other questions you would like answered in a future post, as I am building a list based on feedback from my network!]

2 Scans. 30min. This was the result!!!

When it comes to "3D Laser Scanning", everyone is very interested in the technology, its capabilities, and the variety of deliverable options.

We often receive questions, such as.....

How long would it take you to capture a small site ?

How many scan setups to capture a piece of equipment ?

Can it help reduce my project costs ?

Is it more expensive than traditional methods ?

Can you provide an As-built 3D Model into  -Fill in the blank- ?

I wanted to share a quick example.

Below are a few images showing a "tower" that was scanned as a demonstration. A total of (2) Laser Scans were captured, and a total of 30 minutes spent on site. with just 2 Scans, we have approximately 90 million individual measured points!...  

[Image Above: 2 Laser Scans, during the registration process (1 scan shown as Red, the 2nd scan shown as Green]

[Image Above: Black & White Point cloud after the scans were registered]

[Image Above: Final Colorized Point Cloud, utilizing the captured images]

[Image Above: Example of measurements labeled directly from the point cloud]

[Image Above: Example of measurements pulled from the panoramic viewer]

[Image Above: Example of measurements labeled directly from the point cloud]

All of this data was captured on site in 2 laser scans, in less than 30 minutes.

We can now digitally pull measurements on any of the data, use it for planning, design, create a 2D site plan, sections, elevations, and create a 3D Model to import into other software such as AutoCAD, Revit, Navisworks, etc.

I hope this information was helpful! If it was, please let me know by simply adding a "Like, Comment, or Share".. Please continue to check back often, as there will be more posts coming soon!

(Also, please feel free to connect with me anytime! I enjoy networking, and discussing collaboration!)

Matthew Byrd : Owner / President @ Nexus 3D Consulting  :  [email protected]   :   (661) 873-5286