13 test parameters to test the Turbine Oil, as per the standards.

*Test Parameters:

1.?Viscosity

2.?Viscosity Index

3.?Flash Point

4.?Pour Point

5. Demulsification

6. Copper Corrosion

7. Acid Number

8. Foam Characteristics

9. Oxidation Characteristics

10. Water Separation

11.?Rust Prevention

12.?Cleanliness

13.?Water Content

*Oxidation Stability Test:?Turbine Oil Oxidation Stability Test?(TOST) is a valuable tool to indicate?oil?life for?lubricants?continuously exposed to gross water contaminations, high temperatures, and air entrainment in field service.

ASTM D943 is commonly referred to as Turbine Oil. The oxidation Stability Test (TOST) is widely used in the lubrication industry to evaluate oxidation stability.

*Best Practices for Steam Turbine Lubrication:

?1.?Keep Oil Clean, Cool and Dry

2. Install High Capture Efficiency Breathers to your Oil Respective Oil Tanks

3. Monitor returning bearing oil temperature regularly

4. Maintain proper alignment

5.?Inspect for signs of foaming and /or Air Entrainment

6.?Install primary (return line) and secondary sampling points

7.?Perform regular oil analysis

8.?Routinely inspect sight glasses for level, foam, and water

9.?Keep tank headspace dry using?blowers, condensers, or instrument air

10.?Drain accumulated water regularly

11.?Use offline fluid conditioning for precision contamination control

12.?Regularly inspect for varnish, especially in gas turbines

13.?Protect against water and or detergent ingress during wash-down

14.?Inspect bulk delivery of new oil before acceptance?

We at?Minimac?study your maintenance needs and provide the best solution.?We believe in?Discern, Design & Deliver.

Contact Us?for Mechanical Maintenance & Oil Check.