11 Quality Problems Of Standing Table Legs
The standing table legs has been popular for a long time in the world, and many factories that produce it. But even so, there is still no guarantee that every standing table legs is high quality. The production process for electric table legs varies greatly from different manufacturers. They will use different motors, control systems, leg materials, and building techniques (reflected in the installation).
Both personal consumers or companies that resell, they all need the high quality standing table legs. As a manufacturer focusing on wholesale business, we are directly dealing with wholesaler, retailers, brands and furniture dealers. We totally understand that low quality standing table legs will bring bad reviews. In the long run, it affects the growth of profit and your business. As a buyer, or owner, you should avoid these standing table legs.
So, at this stage, what are the quality problems or complaints about the standing table legs? We summarize the common quality problems (excluding the table top). Please check out the quick summary below.
1. Only one standing table legs works;
2. Table top is sloping;
3. Screw is too short (common in single motors);
4. Lifting height range does not match;
5. Low-quality motors;
6. Control system error code;
7. Rough structure
8. Wrong hardware;
9. Power cord problems;
10. standing table legs surface scuffs
11. Simplified standing table legs models
1. Only one standing table legs works.
This is the most serious quality defect, losing the functionality of the electric desk. When one leg rises and the other does nothing, will drop what is on the table, and customer’s expectations. And with it comes their bad reviews and anger.
2. Tabletop is sloping.
A sloped table leg can be caused by several reasons:
– The worst is when one table leg does not work at all;
– All desk legs work, but they rise distance or speed is not consistent;
– The legs are installed at different heights
– Rare but unfortunately, table legs are bent due to compression.
3. Screw is short (common in single motors)
When you’re installing it well, you suddenly realize that the screw rod doesn’t connect to both legs. (Usually in single motor standing table leg models)
4. Lifting height range does not match.
Linear actuators are the core components used in all applications that require smooth linear motion, include the standing desk leg.
The linear actuator is composed of motor, reduction gear, screw, nut, guide sleeve, push rod, sliding seat, spring shell and the control switch. In addition to large industrial equipment, linear actuators also have many applications in medical and furniture fields.
5. Low quality motors.
The motor is one of the core components of the standing table legs. The table need to be pushed up and down by the motors, but not all motors are capable of doing their job well. Motors must be tested for working performance and longevity. Low-quality motor for the entire desk trembling, or even direct broken down.
Timoek standing table leg motors are CE and UL certified, dual motor standing table legs can load 120kgs. (It can max load 150kgs in testing).
领英推荐
6. Control system error code.
The control system is one?core of the standing table legs. It needs to debugging with the motor and hand control panel. The handset controls the motor through the control box, to achieve the rise and fall of the table. And guarantee 25,000 times working. At the same time, whether the heat during operation, whether don’t work and throw error code. When there is an error code, can correct the error according to the instructions. These are what an excellent standing table legs control system has to accomplish.
7. Rough structure standing table legs.
Misaligned parts increase the difficulty of installation, and no one wants to spend a lot of time on installation, especially when faced with mismatched nuts and bolts. Even if it is barely installed, the rough structure will make the table have many problems: excessive noise, metal rubbing, poor stability, inconsistent rise speed of the desk legs, etc.
8. Wrong handware.
Each standing table legs requires a large amount of hardware for installation. Although the hardware accounts for a small percentage of the raw materials and the lowest cost, the wrong hardware will greatly reduce the performance of the standing table legs, and even does not complete the finished assembly.
9. Power cord problems.
Standing table legs needs electric power to drive. And there are different countries and regions in the world use different plugs, the common ones are American plug, European plug, UK plug, Australian plug. As a power source, when the power cord has the following problems, the standing table legs can’t work.
– The plug does not meet the local usage standards
– The control box cable is too short
– The power cord is broken
In addition, a low-quality power supply will reduce the rate of rise of the table legs and the stability of the overall frame.
10. Standing table legs surface scuffs.
Although standing table legs focus on functional, no one wants to receive a defective product.
?In transit, low-quality carton can not fully protect the legs, resulting in bumps and scratches. There is also a more serious situation, where the desk legs are unevenly painted at the manufacturer, or the paint does not dry but it hits other colored objects, then leaving marks.
11. Simplified standing table legs models.
In order to cater to the market, some manufacturers and retailers selled the low-priced standing table legs. Some unnecessary features are reduced to lower production costs. The following models are commonly available:
Width can’t adjust
Single crossbeam
Inverted sit stand desk base
Specific information can be found in Timoek past articles at:?5 Low Price?Sit Stand Desk Base?You Should Know
Some models do not reduce performance too much, while others significantly reduce the expectations of the user.
Whether you are a personal consumer or a company buyer, you should avoid these products with quality problems. Hope this article is helpful when you buy?standing desk legs.