10 Recommendations for Better Combo Roof Experience.

During my interactions and discussions with contractors and individual villa owners over the years, I have mostly understood that there is a grey area that requires more clarity in choosing the right roof combinations, as most discussions emphasize the commercial rather than the technical aspect or added value. Basically, quality and integrity are the key factors that make the difference. But if someone considers these 10 points before selecting a Combo roofing contractor, they can be more confident of their choice and be protected from heat and leaks throughout the life of the building.

So here is a simple but effective list of my 10 recommendations for a better Combo Roof experience.

10 Recommendations for Better Combo Roof

1)????Since the core material is #polyurethane and this itself is manufactured on site with spray equipment, it is important to ensure that the source of the material is credible and the formulation for all roofing is ONE with the brand specified, never mix brands.

2)????Non-polyurethane products used as protection for the PU layers should be subjected to thorough quality control prior to on-site application, for which it is essential that certificates of analysis are provided by the applicator on request.

3)????As the system is covered with a structural screed that provides the ultimate protection for the core insulation and waterproofing layer, the thickness, density, slope, workability and surface finish of the screed must not be compromised.

4)????To avoid cracks in the surface, there must be joints every 3*3 meter, treated with sealants at a ratio of 2:1 in width and depth.

5)????Finishing is another important area where vertical treatment should be at least 6" from the finished floor surface and corners must be treated with sufficient fillet to avoid cracking as rectangular joints are inherently weak.

6)????Application intervals between coats must be maintained as all types of materials require adequate drying and curing time to perform better in the long term.

7)????Since it is a handcrafted product, well-trained workers with controlled application guidelines must be strictly followed on site, from surface preparation to material handling, mixing, application and finishing.

8)????As this is an on-site application, monitoring and quality control is recommended until the complete system is completed and even beyond to ensure that the product is intact on the roof.

9)????It is very important to choose the right manufacturer and installer who is committed to delivering quality products and installations on time and protecting the roof for its lifetime.

10)?Finally, make sure that the warranty is credible and authentic because it is not a piece of paper but a certificate that guarantees the product performance of the roof.

I always emphasize that every roof is important to both the owner and the installer and that it is the responsibility of both to choose the right service provider and deliver quality services with pride.

#construction #constructionchemicals