Trupply的动态

?? Discover the Proper Technique: Watch Our Video on How to Torque a Flange! Join us as we guide you through the procedure, sharing valuable tips and insights along the way. Let's find out together everything you need to know to achieve optimal results. #FlangeTorquing #IndustrialMaintenance #ExpertTips #LeakPrevention

What is a K-C WELD RING GASKET and how does it work?

Ductile iron pipe are cast from molten iron in molds, spinning at high speed in a feat of precision engineering that is awesome to see up close. This is no cookie-cutter operation. Each pipe, while meeting every spec and passing every inspection, is unique. So, occasionally, when cutting a pipe to fit a custom length, you may encounter a stick that needs to be rounded to slide cleanly into the joint. One of the easiest ways to get the job done is with the McWane Ductile external field rounding kit. In this video our expert product engineer Jerry Regula demonstrates how to identify when you have a pipe with slight ovality and how to use the kit to bring it back to round. Check it out! #IronStrong #DIPipeTips https://lnkd.in/duqea-qS

Two common flange face serration types are continuous and concentric. Continuous serrations are a spiral on the face of the flange, from the outside edge to the inner bore, or to the center in the case of a blind flange. Concentric serrations are circular grooves spaced evenly across the entire face, like a bullseye.

When you make a PE manifold there are always two options, one as in the video to work with tee units and the other to weld directly on the body of the manifold. Advantages and disadvantages for each of them

Well that takes pre-heating the weld joint to a new level ?? ??, No need to worry about LEL (Low Explosive Level) or the UEL (Upper Explosive Level) here .

An oldie but a goodie - watch Episode 3 of our Principles of Joint Integrity series. This episode focuses on Flange Alignment and why it matters. #bolting #engineering #JointIntegrity

When designing a preparation exercise, does the location on the field help players to connect technical actions with their own performances? A lot of the time, field space is extremely limited and coaches are not able to place exercises with relation to the technical or tactical actions. If you are able to determine the location of exercises, does it benefit to use realistic positions on the pitch? This exercise includes an initial build-up phase that then uses wide player combinations and then finishes with a cross into the box. Could the position of the exercise benefit fullbacks or wingers with natural crossing positions? Let me know your thoughts! https://lnkd.in/ebFqmm9b

In this video I show you how we are installing new internally coated pipe and how we put the inner sleeve and Weld it

Let’s take a look at the steps for assembling the ball valve!