Lindco Equipment Sales- Division of Viking Cives Group的动态

slewing Gear crane

When using #shackles with slings in choke hitch, or in other applications where there may be movement, place the pin through the eye or link of the sling and never in contact with the bight of the choke or moving parts, which may cause the pin to unscrew. Do not use defective shackles or unidentified pins. Do not attempt #lifting operations unless you understand the use of the equipment, the slinging procedures and the mode factors to be applied. #RopeandSling #shackle

What Are Shackles? Usually, it is a U-shaped metal link, which comes with an opening secured by a clevis or a bolt pin. It can also be a hinged metal loop with a locking pin mechanism. A typical shackle consists of the following four parts. Bow:?It is the curved-shaped body of a shackle. Ears:?Ears are the threaded parts where the pin is attached/inserted. Pin:?Pin is probably the only detachable part of a shackle. It’s a steel bolt that runs across the two ears. It secures shackles?to a load perfectly. Shoulder:?It is a part of the pin. It comes in contact with the ear when the pin is fully threaded. Apart from rigging?and lifting?operations, shackles?play a critical role in various towing, tie-down,?hoisting, and pulling applications. You can use a suitable shackle depending on your load size, working load limit, and a few other factors. #Shackles #Rigging #Lifting #Towing #Hoisting #Tools

Dump trailer aluminum rear hatch hinge repair?

It’s important to understand a jib boom attachment moves the center of gravity of the combined forklift and load forward. This load shift will change the load center and therefore an operator must use a de-rated load chart provided by the manufacturers of both the forklift and attachment manufacturer. Read more: https://bit.ly/43qWsw0 #ForkliftSafety #ConstructionSafety #MaterialHandling #IndustrialSafety #WorkplaceSafety #EquipmentSafety #HeavyLifting #JibBoomSafety

When working with a mechanical restraint, such as a pit prop, there are procedures to follow to ensure a safe working environment. Refresh your knowledge on lift pit props by taking our Toolbox Talk on this subject. Click here - https://ow.ly/4E1p50SE5PL #liftindustry #liftpit #toolboxtalk #pitprop #elevatorindustry #ToolboxTraining #ElevatorSafety #WorkplaceSafety

Bridge lifting and bridge jacking using FPT equipment: ?? lock nut cylinders with locking collar ?? low height to fit to confined spaces ?? with lock nut to hold the load on fully safety ?? FPT synchronous lifting system to manage the lifting on a automatic mode with an extreme precision #bridge #bridgelift #jacking #fpt #fptfluidpower

The Fully Automatic Crawler-Type Washing Machine is designed for cleaning all types of bearings and related accessories. It offers a customizable work pace, allowing it to adapt to various production requirements. The cleaning process begins with feeding the parts into the machine, followed by demagnetization to prepare them for cleaning. The parts are then subjected to spray cleaning, ultrasonic cleaning, and another round of spray cleaning to ensure thorough cleaning. Afterward, the parts are air-dried before being discharged from the machine. This machine uses a specialized cleaning agent formulated specifically for bearings, ensuring optimal cleaning results for all types of bearing components. #bearing #ballbearing #bearings #AssemblyLine

?? Just completed a LOLER thorough examination on a vehicle lift, and it revealed some issues: ? Pick-up pads not retained ? Floor fixing bolts were loose – compromising the safety and stability of the lift. #LOLER #SafetyInspection #VehicleLift #WorkplaceSafety