Ignition lock cylinders can be purchased in two different ways; coded when the lock is already set up to a random key or uncoded when a technician will have to assemble the lock in order to match the desired key, either way the lock can always be disassemble after and rekey to match the original combination in order to keep your car factory settings, there is no need to carry two different keys one for the door and one for the ignition when the job can be done the right way by matching the original key. Car Dealerships and mechanic shops in need of support at the request of their customers will subcontract a locksmith to rekey ignitions because this is not a service that they provide; the part will be install as it came in the package. Get your ignition lock replace or rekey at Automotive and Commercial Locksmith Shop with confidence, our highly trained technicians will take care. https://lnkd.in/gP9MsHkD
Automotive and Commercial Locksmith的动态
最相关的动态
-
When your vehicle is under warranty, the engine dismantling process is carefully managed to ensure that the warranty conditions are met and that the work is performed by authorized personnel. 1. Approval: The service center gets permission from the manufacturer to dismantle the engine. 2. Inspection: Technicians check the engine for issues and document the problem. 3. Dismantling: Trained technicians carefully take apart the engine as per the manufacturer’s guidelines. 4. Fault Check: They inspect parts to identify the cause of the problem. 5. Repair/Replacement: If a warranty-covered issue is found, they repair or replace the parts. 6. Reassembly: After fixing, the engine is reassembled and tested before returning the vehicle to you.
要查看或添加评论,请登录
-
Trailer Breakdowns ? This is a word that we all “hate”, and we constantly blame the technician for his poor quality of workmanship. We seldom ask the question, what can we do differently, or do the technician have all the necessary equipment, PLUS training? We all assume if he is qualified then he must know everything – WRONG. ? Let’s do something differently Technology is available, why do we not use it to prevent human errors? REAL time technology systems that notify management of potential break down or risk factors - examples: -???????Trailer does not have the required air supply to release the brakes – brake binding -???????Number of harsh braking -???????ABS interventions -???????RSS interventions -???????Number of brakes applications -???????Incorrect tyre pressure(s) per wheel position -???????Load distribution -???????TPMS temperature ? All the above risk notifications on a map indicating the position, date, and time. ? Below real time graphs indicate tyre pressures and temperatures - now we can start to manage cost factors. ?
要查看或添加评论,请登录
-
-
A little correction to what I said here, you can structure your shop with a specialized frame technicians and separate body technicians and still win. The main key that makes an A level technician is being a subject matter expert on what any vehicle needs to be fully restored back to pre loss condition and be able to do that said repair in a profitable way.
要查看或添加评论,请登录
-
A perfect repair is always the target when fixing a truck, but distractions and improper processes can cause a technician to miss the bullseye. Improving aim starts with knowing how many times the shop misses the target.
要查看或添加评论,请登录
-
This is one of the most common questions we get! The engagement and disengagement of the override and block/bleed are a tough concept. The post below intends to help simplify and demystify the declutchable gear operator!
How Does a Declutchable Gear Operator Work? A declutch gear operator, also known as a declutch-able manual override or a manual handwheel, is a device commonly used with industrial valves and actuators to manually operate the valve when needed, regardless of the automated or electric control system. It provides a means for manual operation in case of power failure or... Click here to continue reading the article: https://hubs.ly/Q02t-gkk0
要查看或添加评论,请登录
-
https://lnkd.in/g5WXAn9r #fuelpump Repairing a fuel pump can be a complex task and may require specialized knowledge and tools. Here's a general overview of the steps involved in repairing a fuel pump: Diagnosis: Before repairing the fuel pump, it's essential to diagnose the problem accurately. Common symptoms of a failing fuel pump include engine stalling, rough idling, or difficulty starting the vehicle. Diagnostic tools such as a fuel pressure gauge and scan tool can help identify the issue. Accessing the fuel pump: In most modern vehicles, the fuel pump is located inside the fuel tank. Accessing the fuel pump usually involves removing the fuel tank from the vehicle. This can be a labor-intensive process and may require lifting the vehicle and disconnecting various components such as fuel lines and electrical connectors. Inspecting the fuel pump: Once the fuel pump is accessible, it's essential to inspect it for any signs of damage or wear. Common issues with fuel pumps include worn bearings, damaged wiring, or clogged filters. Additionally, the fuel pump's electrical connections should be checked for corrosion or loose connections. Repair or replacement: Depending on the extent of the damage, the fuel pump may be repaired or replaced. Minor issues such as clogged filters or electrical problems can often be repaired by cleaning or replacing the affected components. However, if the fuel pump is severely damaged or worn out, it may need to be replaced entirely. Reassembly: After repairing or replacing the fuel pump, the fuel tank can be reinstalled in the vehicle. Care should be taken to reconnect all fuel lines and electrical connectors properly. It's also essential to ensure that the fuel tank is securely mounted to the vehicle. Testing: Once the repair is complete, the vehicle should be tested to ensure that the fuel pump is functioning correctly. This may involve running the engine and checking for proper fuel pressure and flow. It's worth noting that repairing a fuel pump can be challenging and may require specialized tools and knowledge. In many cases, it may be more practical to replace the fuel pump entirely, especially if it's nearing the end of its service life. Additionally, working on the fuel system can be dangerous due to the flammable nature of gasoline, so caution should be exercised at all times. If you're not comfortable with repairing the fuel pump yourself, it's best to seek assistance from a qualified mechanic.
要查看或添加评论,请登录
-
Dear Automotive Technician, Proper tire pressure keeps the vehicle running smoothly. Therefore always endeavor to check the tire pressure of your client by: ? Removing the valve cap. (If it’s there) ? Pushing the tire pressure gauge against the tire valve stem. ? Taking the reading on the gauge’s scale. (Normally psi) ? Comparing the pressure reading with the specified tire pressure. Note: The specified pressure is located on a placard attached to the driver’s door. ? And later on adjusting the tire pressure as per the placard’s specifications. #TireSafety #TirePressure #TirePressureGauge
要查看或添加评论,请登录
-
-
Let's talk about brake fluid and moisture! When brake fluid becomes hygroscopic, meaning it has absorbed moisture from the air, it can lead to reduced braking performance and potential damage to the braking system. Here's what you should do: *Flush the Brake System: Replace the contaminated brake fluid with fresh, clean fluid. Flushing the brake system removes moisture and contaminants, restoring optimal braking performance. *Inspect for Damage: Check brake components for any signs of corrosion or damage caused by moisture-contaminated brake fluid. Address any issues promptly to ensure safe operation of the braking system. *Monitor Fluid Regularly: Keep an eye on the brake fluid level and quality regularly. Perform periodic checks and maintenance to prevent moisture buildup and ensure the brake system remains in good condition. *Use High-Quality Fluid: Choose a high-quality brake fluid with low hygroscopic properties to minimize moisture absorption and maintain brake performance over time. *Seek Professional Help: If you're unsure about performing brake fluid maintenance yourself or if you suspect significant damage to the braking system, seek assistance from a qualified mechanic or automotive technician. They can properly assess the situation and perform any necessary repairs or maintenance.
要查看或添加评论,请登录
-
-
We break down the Top 10 tools needed to successfully perform automotive electrical repairs. Do you have these tools in your toolbox?
When it comes to automotive electrical repairs, having the proper tools is just as important as having the necessary knowledge and expertise. As a connector specialist or auto body technician, you understand that the tools you use determine the quality of your work, particularly when dealing with automotive electrical connectors, automotive wiring harnesses, and various other electrical systems. Check out our latest blog post for the top ten tools every automotive harness expert should have in their toolbox. https://lnkd.in/eNaCk2wt
要查看或添加评论,请登录
-