Applied Motion Products的动态

Read this article to learn how instantaneous mode switching with the MMS760xxx series and MMS740xxx series from EZmotion provides immediate and seamless transitions between different control modes in servo motor systems without any noticeable delays. https://lnkd.in/gmF7ryBB

In this video, see a demonstration of our Hybrid (HB) Stepping Motor with Batteryless Absolute Encoder in a 1-axis configuration and a 3-axis configuration. We also demonstrate our advantage in emergency stop scenarios, because incremental encoders have to recalibrate after emergency stops. In contrast, our Hybrid (HB) Stepping Motor with Batteryless Absolute Encoder can resume operations immediately after an emergency stop because of the absolute encoder: https://lnkd.in/eTBS2TY8

? Many applications that operate with electromechanical systems require a single control system that has the capability of operating multiple actuators at the same time. ???? These types of advanced linear actuator controls can allow for advanced features such as synchronous motion, memory preset positions, and the user convenience of being able to access all actuators from one controller. This article will showcase our new PA-41 Control System while covering our product range which has been designed to control multiple linear actuators through a single control box. https://bit.ly/3ueNi8I #electromechanicalsystems #actuators #actuatorcontroller #newproductrange #progressiveautomations #linearmotion #engineeringnews

?? High resolution encoders (64 108 864) pulses / révolution to ensure stable positioning and reduce torque fluctuating.

absolute positioning without a battery

The S7-1500 (T) with Motion Control functionality not only controls the S200 Servo Drive via the PROFINET network but also controls third-party drives via analog signals (-10VDC to +10VDC) and HSC (High-Speed Counters). The demo will show how to gear the Siemens drive with a third-party drive in a synchronized motion control application.

Position# sensor Encoder#: controls the rotation of the electric motor by the Engel degree

Cutting Edge Optronic’s eDrive Nitro integrates optional power supplies, RF drivers, and other accessories in a single rack-mounted housing. Configurable for driving diodes in either CW or QCW operating modes, all aspects of your #LaserSystem can be managed with one unit. The eDrive Nitro has been designed to maximize reliability. It is equipped with multiple control options, an easy-to-use local front panel interface along with a host of digital remote control options, including Labview compatibility, which are all offered as standard. All system components are conservatively rated, and high-power circuits are physically separated from low-power circuits. A variety of power supplies, single or dual-axis Q-switch drivers/controllers, and temperature controller options are available. Learn more: https://bit.ly/3VLvr48 #LaserSystems #eDriveNitro #LaserDiodeDrivers

Integrated Motion Control (IMC) is also available in the new Danfoss #iC7 drives series, which feature a shaft performance second to none! The video shows a drive positioning to catch the ball and another one running synchronization. No encoder feedback is needed! The motion control is done by the drives. #intelligentdrives #danfossdrives