课程: Design for Additive Manufacturing: FDM

今天就学习课程吧！

今天就开通帐号，24,600 门业界名师课程任您挑！

Shells, infill, top, and bottom layers

Shells, infill, top, and bottom layers - Fusion 360教程

课程: Design for Additive Manufacturing: FDM

开始一个月试用 购买团队方案

Shells, infill, top, and bottom layers

“

- [Instructor] Now let's optimize with shells, infill and top and bottom layers. Go to the file folder and open Optimize number three and choose Open. Zoom in here for a closer look. So on Shell, let's click the gear to bring up the custom settings. Let's add Wall Line Count and Top Layers, Top/Bottom Pattern and Infill Pattern to our custom settings. Then I'll choose Close. You can see that we have those new settings available now. We're going to talk about wall thickness again, but this time it's referring to the thickness of the shell, that repeated outline on the outside before it turns to infill. So in Cura, we have a couple different ways to take a look at wall thickness. Let's pull our visualization down to the middle, so we have a nice view of the middle of our print. We can change the wall thickness by changing the dimension to two millimeters, or by changing the wall line count, which is the number of thread width passes around the outside. We can change that to four. If I…

内容