课程: Design for Additive Manufacturing: FDM

今天就学习课程吧！

今天就开通帐号，24,600 门业界名师课程任您挑！

Setting up your project

Setting up your project - Fusion 360教程

课程: Design for Additive Manufacturing: FDM

开始一个月试用 购买团队方案

Setting up your project

“

- [Instructor] For our project, we're going to create a box with a print in place hinge. We'll optimize this design to print on an FDM printer with a single extruder. So no support material required. We'll be using some of the design rules we learned in the course, like using 45 degree angles to avoid overhangs, optimizing for line width, utilizing bridges and understanding clearance to complete this project. So I'm already in Fusion 360 with a new untitled document. I just want to check that we're all on the same page before we get started and check our preferences. So go up to Fusion 360 at the top and choose Preferences. I like the Default Modeling Orientation to be set to Z up, so make sure that yours matches. And choose OK. Down at the bottom here under Grid and Snaps, also check that the Layout Grid is on and that here we are in the MODEL workspace.

内容