课程: Design for Additive Manufacturing: FDM

今天就学习课程吧！

今天就开通帐号，24,600 门业界名师课程任您挑！

Print in place strategies

Print in place strategies - Fusion 360教程

课程: Design for Additive Manufacturing: FDM

开始一个月试用 购买团队方案

Print in place strategies

“

- [Instructor] Let's explore some print in place assemblies. Print in place and preassembled are two terms coined by the DIY 3D printing community to describe FDM 3D printed parts that contain integrated hinges, joints, and other types of captured features. There are a couple key print in place strategies. Pull parts down to the build plate. Angle up at a 45 degree angle. Leave clearance around moving parts and bridge over and through gaps. I want to show you a few examples of these strategies in action by exploring some print visualizations. A pin hinge is created by angling up to create a barrel and then bridging through it in short segments. A dimple hinge is created by printing nested cones or spheres with the right amount of clearance between the parts. A living hinge is made by planning a thin layer for flexibility. This is a cap that will bend back over the circular opening. This is best accomplished with flexible filaments. Create a chain by carefully planning your…

内容