课程: AutoCAD 2023 Essential Training

今天就学习课程吧！

今天就开通帐号，24,700 门业界名师课程任您挑！

Using Stretch and Lengthen

Using Stretch and Lengthen - AutoCAD教程

课程: AutoCAD 2023 Essential Training

开始一个月试用 购买团队方案

Using Stretch and Lengthen

“

- [Instructor] We're in Office Layout_3.DWG again, and as you can see, I've left it in the same place as it was at the end of the last video where we did our decking and our planting and so on at the rear of the building. What I'd like you to do is, zoom out slightly and then sort of come into the middle of the office here with the cross here, roll up on the wheel a bit and zoom into the center of the office. Now you can see there's a little purple line here and it's on the layer carpet. We're going to use the Lengthen command to lengthen that line dynamically all the way across the office to this wall here. Now, I could use extend if I wanted to but I'd like to show you the Lengthen command. Now the Lengthen command is up on the modified panel on the home tab, on the ribbon. I'm going to click on the fly out here and just pin it open. Like we've done previously in previous videos and the Lengthen command is just here.…

内容