Electronics Assembler II

Crane Aerospace and Electronics has an exciting opportunity for an Electronic Assembler II at our Lynnwood, WA location.

About Crane:

Crane Aerospace & Electronics supplies critical systems and components to the aerospace and defense markets. You’ll find Crane Aerospace & Electronics in some of the toughest environments: from engines to landing gear; from satellites to medical implants and from missiles to unmanned aerial systems (UAS).

Located in the epicenter of United States aviation manufacturing, our Crane Aerospace & Electronics Lynnwood, Wash., facility delivers industry-leading aerospace & defense power and fluid solutions. Our products are rugged enough to fly 5 billion miles from Earth on NASA’s New Horizons spacecraft and innovative enough to be featured on Eviation’s Alice all-electric aircraft. You’ll join a group of aerospace professionals committed to engineering excellence and work in a community tucked between the idyllic Puget Sound and Cascade Mountains. Start the next chapter of your career with Crane Aerospace & Electronics!

Job Summary:

The Assembler II - Electronics works under supervisor performing assigned assembly processes to manufacture Crane Aerospace & Electronics products in accordance with military and/or other assembly standards using visual aids, verbal and/or written instructions. In addition, the Assembler II – Electronics communicates with the manufacturing team and performs visual and dimensional inspection.

Essential Functions:

• Perform assigned assembly tasks
• Prepare components prior to assembly, clean components, mark, and inspect components, subassemblies, or completed assemblies
• Demonstrate proficiency in performing established operations within 2-4 area processes
• Ability to ensure all paperwork is completed appropriately
• Set up and operate assigned equipment and machinery
• Observe proper health and safety procedures in handling hazardous chemicals
• Identify and report to lead or supervisor any difficulty which would affect the correctness and quality of the work in process
• Understand daily demand per Master Schedule Report for the cell(s) they are working in
• Create IT, Facilities work orders, Non-Conformance Reports (NCRs) for quality and material issues.
• Assist in resolution of Non-Conformance reports.
• Participate in cleaning of area and machinery and take part in team meetings for improvement
• Practice safe work habits as established by OSHA and Crane policy; Proactively identify safety concerns or issues and work with the Engineering group to implement solutions
• Support Crane Business System (CBS) initiatives including 5S, KPI’s, Standard Work, Problem Solving, and other initiatives as they arise
• Complete job-related company training courses
• Flexible and willing to work overtime if necessary
• Any other task assigned by supervisor or management
  
  
  

Minimum Qualifications:

• Experience: 2-5 years of Assembly experience in a manufacturing environment
• Knowledge: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
• Skills: Strong verbal and written communication; Proficiency in reading comprehension (understanding written sentences and paragraphs in work related documents) of the English language; Basic computer skills (understanding of basic software)
• Abilities: Accurate color vision, near vision, and depth perception and other vision capabilities required; Manipulative skills, including finger and manual dexterity; Adept hand-eye coordination and arm-hand steadiness; Ability to thoroughly interpret production or engineering prints, production planning information and assembly aids such as illustrations and wiring diagrams; Ability to work well in a moderate to high paced work environment in a high-volume setting
• Education/Certification: High School diploma or equivalent, Fine soldering certificate or equivalent experience
• Eligibility Requirement: This position may require access to Controlled Data or Information. Where the position requires such access only US Persons will be considered. As a US Department of Defense contractor, we are bound by International Traffic in Arms Regulations (ITAR).
  
  
  

Preferred Qualifications:

• IPC Soldering Certification or equivalent basic soldering experience
  
  
  

Working Conditions:

• Working conditions are normal for a manufacturing environment
• Manufacturing operations may require the use of safety equipment ( P ersonal P rotective E quipment ) to include but not limited to: eye safety glasses, gowning, masks, hearing protectors, heel/wrist straps and any other required PPE
• May be exposed to unusual environmental conditions such as loud noises, cold temperatures, confined spaces, dust or fumes
• Standing: 25% *percentage is approximate and may vary depending on work task
• Sitting: 75% *percentage is approximate and may vary depending on work task
• Lifting (in pounds): Up to 40 pounds
• Pushing (in pounds): Up to 40 pounds
• Mental/Visual: Use of soldering equipment, microscopes/magnifying glasses
• Workspace: Assembly Cell
  
  
  

Top Benefits:

Salary range: $19.50 to $ 27.93. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Some roles may be eligible for participation in performance-based bonus programs.

As a team member at Crane Aerospace and Electronics, you’ll enjoy:

• Benefits: Health care, dental, vision, life and disability insurance starting the first day of the month
• Time Off: 15 days of paid time off that start accruing your first day at Crane and 12 paid holidays per year.
• 401k Retirement Plan: 401k plan with company match
• Education Reimbursement: eligible after 90 days of employment
  
  
  

You can see a list of our benefits at https://www.craneae.com/company/careers or visit our website at www.CraneAE.com for more information on our company and great opportunities.

We are committed to operational excellence and world class processes. We employ Lean manufacturing techniques to optimize manufacturing efficiency and accuracy on all product lines. Our products are known for their technical strength, proven reliability and overall value.

In our efforts to maintain a safe and drug-free workplace, Crane Aerospace & Electronics requires that candidates complete a satisfactory background check. FAA sensitive positions require employees to participate in a random drug test pool.

This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.

Crane Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, creed, religion, sex, national origin, marital status, age, sexual orientation, gender identity, disability, pregnancy, medical condition, genetic information, protected veteran status or any other characteristic protected under federal, state, or applicable local law.