Novo Modo Machining

Novo Modo really enjoyed your visit Justin Keskel. You had great questions, you were able to float around the shop in a way that was little to no distraction, and your presence was warm. We could totally see you doing something like this as a side gig or profession. Your IMTS write up and this post have been well written and received.

CNC West has chosen to tell the story of Novo Modo and our founder. Putting over 20 years of dedication and experience to the test and Killing IT! Cool thing is, the article came out on Joseph Alonso 's Birth Month. What a coincidence. https://lnkd.in/gE2vDCvv

John Trujillo your going to give Joe a big head! ??

Looks like someone left Joseph Alonso alone too long with the Hermle USA, Inc. team at #IMTS this year. I bet they used beer and flattery to get him to whip out his checkbook again... Well, we better get this thing producing chips soon. They do not pay for themselves sitting there looking all pretty!

Find the time if you can to Visit Hermle USA, Inc., step up to the machine to discover what Joseph Alonso has discovered and meet him at the same time.

In our previous post, we talked about how incredible it is that we cut #metal like we do as #machinist. What is equally as #incredible, is holding onto a chunk of metal as you jam a cutter through it at mind boggling rates. Let alone, holding onto it with just some hydraulicly pressed dimpling! HWR Workholding USA for the win. With their hydraulic crimping system and self-centering vices, you can lock these things into your zero-point tooling with incredible repeatability. We currently hold a 7050 and 6061, 10-inch-tall block (this is vertical in Z), 8-inches-wide and 4-inches-thick, holding onto just the crimped edge, and we rip into it with a Fraisa ? inch AX-FPS rougher. We remove over 75% of the metal in just under 30 minutes from this block. They also have an incredible line of unique holding systems like the INOFLEX for holding onto round parts with 4, self-centering jaws! We have the large and small versions here and are absolutely impressed with their performance. When you need grip, you NEED HWR Spanntechnik GmbH. See them at #IMTS2024 this year.

The wheels on the bus go round and round, but here at Novo Modo, the cutting tools and holders in the machine go round and round and round, really, really fast while removing metal. Just the idea that you can cut metal at 1000’s of #RPMs and 100’s if not 1000’s of IPM/MPM is just incredible. To do this #accurately, for long periods of time, with great #reliability, you need #incredible #tooling. Another 2-for-1 post honoring the brands that make Novo Modo Great! Lyndex-Nikken has been with us from the start, which we acquire through Cutting Tool Control here in Seattle. Joseph Alonso is very familiar with their tooling, his #experience with them goes back 20 years. They truly are a #premium Japanese tooling #brand. They have an incredible lineup of inch and metric shrink fit, and the SK collet system is UNREAL! The #versatility, stability, a #capability of the SK Collet system may be unmatched in terms of price<->performance. The Shrink Fit machine, hands down, is the best system for the dollar. A 14KW coil with autosensing tool holder recognition, WHAT! Fraisa USA, Inc.… This may be all we need to say, but we will say more of course! Not only do these cutters ripppppppppp! They last forever, and ever, and ever… On top of it all, they come with all the feeds and speeds data, for probably every common material you can think of and even the exotics. This is real #data, #tested out on various machines at the #factory. We are not talking generic either, we are talking surfacing, roughing, profiling, facing, etc. They have data for it all. They even have several cutters that will ramp into hard metals and soft metals at angles in the double digits. No need for drills when you can just plunge your endmills in. You need to hold onto your cutters, visit Lyndex-Nikken. You want incredible cutting tools with data to back it up, Fraisa. This message is Novo Modo Approved!

The #art that is “cutting chips” can get a little heated! To combat this, someone had the great idea of mixing oil and water together. #Brilliant, we have all seen how well that works. Actually, if you are a #machinist, you know exactly how well it works, you know exactly how many options are out there, and sadly, you know just how many "flavors” they come in… No, Joseph Alonso does not yet know how it tastes, but he does have a favorite and he knew there was only one #SOLUTION. QualiChem Metalworking. Joseph needed to find a coolant that could stand the 1000 PSI being pushed through the spindle and the Micro level filtration, not eat the paint off the inside of his tanks and cause skin or respiratory irritation, and not go rank in record time. Yes, these are all the things he has had to deal with over the years and wanted to prevent in his shop. On top of it all, he needed to find a coolant that had already been certified for use in industries such as #Medical, #Aerospace, #Hardware, etc. He needed a coolant that could cut most any #metal, from milling to tapping, from hard to soft. QualiCHEM brought this all to the table and has stood behind their product with #exceptional support. 1 year in, the color of the coolant is the only thing that has changed. No bad odor, no skin irritation, etc. We have cut #Stainless, #Steel, #Copper and #Aluminum, and we are very happy with its performance so far. Keep your tools lubed this year at IMTS - International Manufacturing Technology Show 2024 by making sure you visit QualiCHEM!

When your #concept for a machine shop is to take on the incredible #challenges of your customers, utilizing the best of #technology you can afford, with minimal staff at all levels of #experience, all while doing it in record time at exceptional #quality, having a #CAM system you can trust is #critical. Part of that trust derives from #accurate #simulation of your machine and the code that will be fed to it. To get these #5Axis Hermle USA, Inc. to dance while avoiding costly collisions and doing it in an efficient manner was a tall ask. In Joseph Alonso's 20 years of #machining, he had yet to find an all-in-one #solution, CAM and Simulation, that actually worked. OPEN MIND Technologies AG has forever ruined his skepticism of this even being possible. On top of it, they delivered a post, that without any edits, worked right from day 1. #HyperMILL with #VirtualMachine is hands down the best #digitaltwin and CAM marriage. There is good CAM software out there, there is good simulation software out there, but together there is only ONE! OPEN MIND, thank you for smashing Joseph Alonso’s skepticism in the most patient and #professional way possible, while simultaneously providing exceptional service and #support. He can be a “hardheaded”, “set in his way” #machinist some days, but even the most stubborn can be persuaded. We have, to date, produced many programs, totaling thousands of parts, in just over 1-year, and not a single crash due to BAD code or BAD simulation. UNREAL! Are you tired of preventable crashes happening at your machine, endless post editing to get your code right, or waiting days or weeks for support? Are you all too familiar with paying multiple companies for CAM, Simulation, Post Support, and on top of it, paying the maintenance to each of them? You want to OWN your software instead of paying a “subscription”? Then you better become Open-minded and visit OPEN MIND Technologies at IMTS - International Manufacturing Technology Show 2024! One company with one solution.?

After we discovered Hermle USA, Inc., the bar had been set high for the next brands we would need to join our #team. If you are to have an amazing 5-Axis Milling center, you need an amazing 5-Axis Caliper, AKA, #CMM to go along with it. Part of the Novo Modo #Concept is every standalone machining center must have its own CMM capable of validating the parts it produces. 5-Axis parts are not easy and quick to inspect with traditional #metrology equipment. You truly need a compliment in capability and technology to fulfill our promise of providing 100% CMM inspection of 100% of our parts. This will be a two-for-one post of brands as we feel they go well together! Along came a brand we had never even heard of, recommended by several individuals. WENZEL America Ltd! With little time to decide, Joseph Alonso flew out to them, touring their facility and their #competitors. I am glad we did. The quality of the machines and the #atmosphere created by the people matched the Novo Modo needs. Even without a demo, we knew we found the right team. The demo was performed by Verisurf Software, Inc., which instantly sold us on the software and the machine. The ease of use was incredible and finding software that could not only program the machine efficiently but produce reports quickly was amazing. The price to value was also a major win. We will be putting 1 of these CMM with every one of our CNC’s. If you are looking to add CMM capabilities to your facility. We insist you visit WENZEL Group GmbH & Co. KG and Verisurf! IMTS - International Manufacturing Technology Show