MCR Oil Tools LLC

congratulations to Louie Schwartz and Production Solutions International for another flawless job using the #radialcuttingtorch technology. saving their customers time and money.

WellPerf's Successful Pipe Recovery Using #RadialCuttingTorch and #StabiLoc ? Customer's Lower Completion BHA became stuck in a 7” CSG. After 31 hours of unsuccessful recovery attempts, customer contacted WellPerf for support. Here's how they successfully completed the job: ?? Job Preparation: Validated BHA information and identified the target cut depth at the Blast Joint, which had ID of 2-1/4”. Wall thickness at the middle of the Blast Joint was 0.625” with a length of 2.83 ft. ID restriction of 1.625” immediately below the Brast Joint ? ?? Execution: A 1-3/4” XP Radial Cutting Torch (RCT) was chosen for its ability to fit the ID restrictions. A calibration run was initiated to confirm BHA components and ID. The electro-mechanical anchor Stabiloc ensured the RCT's stability, precision, and proper cut depth. The operation was successfully completed in 6 hours with no need for further conditioning or fishing. ? This successful operation highlights the power of combining MCR Oil Tools LLC Radial Cutting Torch technology and Stabiloc with professionalism of Pipe Recovery experts in WellPerf. For all your pipe recovery inquiries make sure to contact one of our certified licensees like WellPerf, they will advise you with the best course of action to reduce your Non-Production time. ? #PipeRecovery,#technologyrocks, #WellIntervention #EngineeringSolutions

We are honored to be recognized as one of the Top 100 Workplaces in North Texas! ?? This year, nearly 75,000 employees from over 5,800 companies across North Texas participated in the survey, and we’re thrilled that MCR Oil Tools stands among the top 100 Small companies. This achievement would not have been possible without the dedication, passion, and hard work of our amazing team. A heartfelt thank you goes to all our employees who have made MCR a place where we all look forward to coming to work every day. We would like to give a special shoutout to Patty Garza, our HR Manager, for her tireless efforts in supporting our team and helping them balance personal and work life. We particularly want to acknowledge and thank our founder and president, Michael Robertson, whose leadership has shaped the culture of family and trust that defines MCR. Mike started the company nearly four decades ago and like every true entrepreneur, wore many hats and handled every role in the company. His hands-on approach gave him a deep understanding of the challenges each team member faces,—whether in manufacturing, quality inspection, engineering, supply chain/logistics, or beyond. As we look to the future and continue to grow, we are excited to welcome new members to our team and continue building on the legacy Mike has created. We proudly wear the "Top Workplaces" badge and look forward to continuing to foster a workplace where everyone thrives. #TopWorkplaces #MCROilTools #EmployeeAppreciation #CompanyCulture #GrowthAndInnovation #DFW #ThankYouTeam https://lnkd.in/gefAXyCe

Following MCR’s victory in the Fifth Circuit Court of Appeals against the Department of Transportation which confirmed non-explosive nature of MCR products, we had the honor of hosting the inaugural rally for Speaker Mike Johnson’s American Revival Tour at our manufacturing facility in Arlington, Texas. The lively event featured numerous state and national Republican Party members who discussed a wide range very important topics related to everyday Americans and small businesses. We would like to thank Speaker Johnson for choosing MCR Oil Tools as the first stop on his American Revival Tour. Additionally, we extend our gratitude to our employees and Speaker Johnson's team for their hard work in organizing such a fantastic event in a short timeframe.

Vogel Group Client, MCR Oil Tools LLC, hosted the inaugural rally for Speaker Mike Johnson’s American Revival Tour last week at their headquarters in Texas. Andrew P. Nehring led the visit and was grateful to also host Representatives Pat Fallon, Nathaniel Moran, Randy Weber, Michael Burgess, and Jake Ellzey. Our team is proud to work with our clients across the country in the weeks leading up to this year's elections.

Great work Geoplex Drillteq Limited team, for successfully carrying out this operation safely and efficiently. Thank you very much for sharing your success story. #piperecovery, #radialcuttingtorch

?? Breaking News Update: MCR Oil Tools LLC Receives PHMSA (Pipeline Hazardous Material Safety Administration) Confirmation on Non-Explosive status of its RCT Tool as shipped.??? We are pleased to announce that MCR Oil Tools has received official confirmation in the form of a letter from William S. Schoonover Associate Administrator of PHMSA an agency within the U.S. Department of Transportation, declaring our disassembled Radial Cutting Torch (RCT) can ship as non-explosive. Earlier this year, in May, we shared the ruling from the U.S. Court of Appeals for the Fifth Circuit, which found that PHMSA had acted arbitrarily and capriciously in its attempts to prevent MCR from transporting our disassembled cutting torch containing thermite.?With the Fifth Circuit's ruling in our favor, PHMSA has confirmed that it will regulate MCR’s disassembled tools containing MCR’s proprietary B15 thermite mix as a non-explosive. We take immense pride in our spotless safety record and our innovative solutions that help E&P companies reduce costs and emissions. The Radial Cutting Torch has proven to be most effective pipe recovery tool available; additionally, this confirms that as a non-explosive?radio safe?tool it is also the safest on the market. MCR continues to invest in developing new non-explosive technologies, and we are excited to put this chapter behind us as we focus on delivering innovative solutions to the market. #PHMSA, #RadialCuttingTorch, #RCT, #nonexplosive, #technologyrocks

The Golden Rule for Challenging Well Environments: Find a Skilled Operator, Ensure Thorough Job Briefing, and Use the Right Technology—easier said than done. It all started with a simple WhatsApp message from Adrian Martínez Contreras with Vinco Energy Services SA de CV: “We have a Differential Pressure Situation. We have 2,300 psi of differential pressure.” Bill Boelte’s response, “WOW, that’s a lot,” led to a detailed discussion about the well’s specifics, including completion size, ID, fluid type, and more. Bill and Adrian calculated that using the typically recommended puncher would subject the tool string to an upward thrust of 15,580 lbs, risking significant damage and potential of tool getting stuck. Instead, Bill recommended a smaller Perforating Torch Cutter with a single nozzle for self-anchoring, followed by a Radial Cutting Torch/Electro-Mechanical Anchor combination. They crafted a comprehensive plan with backup options, which was communicated to Vinco’s customer in the Gulf of Mexico. Bill’s final text was, “Adrian, good luck.” Just a day later, Adrian replied: “Good morning, Mr. Bill. Just arrived from offshore from the last job you helped with, and it was a complete success!” We love stories like this because they highlight the importance of not only understanding technology but also recognizing each well’s uniqueness. With trained professionals like Vinco Energy Services and the support of MCR, you avoid accumulating non-productive time. #RCT #RadialCuttingTorch #PTC #TechnologyRocks #PipeRecoverySpecialist

We all remember where we were on 9/11. On that day, Americans of every race, gender, and creed watched in horror as the tragic events unfolded. But we also witnessed incredible heroism—first responders running toward certain danger to save lives. We vow to: Never forget those who lost their lives. Never forget those who bravely ran toward danger. Never forget that liberty and freedom come at a heavy cost. As President Kennedy once said: "Let every nation know, weather it wishes us well or ill, that we shall pay any price, bear any burden, meet any hardship, support any friend, oppose any foe to assure the survival and the success of liberty." #neverforget,

Pipe Recovery in Horizontal well with a tubing packed with sand. ? I want to thank Renegade Services and Bennett Davis Davis for sharing their success story. Their customer faced a tough challenge recovering 2 3/8” 5.95lb/ft tubing from a horizontal well which was packed with sand. Despite multiple attempts using a chemical cutter and four jet cutters from 13,000ft to 10,660ft, all efforts failed, and the jet cutter even became stuck and was left in the well on the fourth jet cutter try. ? After so many failed attempt customer contacted Renegade Services Wireline Services, and Bennett Davis recommended using MCR Oil Tools LLC #RadialCuttingTorch (RCT). After meticulous job planning, a 1.5” #RCT was deployed to nearly 10,600ft. In a single run, the RCT successfully cut and freed the tubing. ? The RCT is well known for its clean cuts, and in sand-packed wells, it delivers even better results. Our proprietary thermite bounces off the silica in Sand, therefore it cuts through the pipe and when reaching the sand outside the pipe, it bounces back inward, polishing the cut surface twice. When dealing with sand-packed wells, don’t waste time with other cutters. Reach out to one of our licensees like Renegade Wireline Services who are experienced pipe recovery professionals and choose RCT for efficient, cost-effective solutions. #technologyrocks, #cleancut, #piperecovery