J.S. Barry Industries

When leaks get scary, call J.S. Barry! Last week we designed and installed a custom enclosure, sealing a leak on a 14” stainless steel steam line at a major power plant in the greater Boston area. Our repair mitigated safety concerns for the plant and we were able to keep them up and running. #leaksealing #leakrepairs #liveleaksealing #clamps #enclosures #steam #steamleaks #dontshutdown #jsbarryindustries #emergencyservices

We can seal leaks on any piping component on any system. Here we are recently, sealing a packing leak on an attemperator valve at a trash burning plant in New Hampshire. This was 940psi, 230 degree, boiler feedwater. We sealed the leak no problem. Keep us in mind before shutting down your systems! #leaksealing #liveleaksealing #leakrepairs #packingleak #boilerfeedwater #jsbarryindustries

This is a line stop we performed this week at a high profile manufacturing facility in Massachusetts. We inserted (2) 6” line stops to isolate a rooftop chiller while the rest of the system remained active. Our customer was able to install valves at the victaulic connetions. The chiller was disconnected and will be replaced. #linestops #linestop #linestopping #chiller #chillers #chilledwater #jsbarryindustries

This is an emergency leak repair we performed this week for a papermill in Northern Maine. We designed a custom 3” x 1/2” tee enclosure, sealing a leak on the thread-o-let of the 1/2” line. Our repair included strongbacks, which keep the compromised 1/2” line from separating from the 3”. This was a major concern of our customer. The system is 400psi, 300F, attemporator water. #leaksealing #leakrepairs #liveleaksealing #liveleakrepairs #dontshutdown #emergencyservice #jsbarryindustries

We seal leaks live on any component on any piping system. Water, steam, chemicals, we can seal your leak and keep your plant running! Here is an emergency leak we sealed live last week on a black liquor line at a paper mill in upstate New York. The plant was able to avoid a costly shutdown and keep their production running. #leaksealing #liveleaksealing #enclosures #clamps #leaksealingcontainmentdevice #emergency

The last couple of weeks we have been performing a large line stop project at a high profile commercial & retail facility in Boston. We isolated 16” condenser water & 18” chilled water, running as high as 230psi, so our customer could cut & weld in new valves. There’s no project too large or small! #linestopping #linestops #linestop #lineplugging #lineplugs #lineplug

We can even isolate steam and condensate lines! We have a trick up our sleeves for most applications. Shown here is a 3” schedule 80 condensate line (15psi, 250F) that we isolated with a line stop so our customer could safely make modifications to the system at a major hospital in Boston. #linestops #linestop #linestopping #lineplug #lineplugs #lineplugging #jsbarryindustries

It’s that time of year again to make sure your heating systems are in good working order before winter. This week we performed 6” freezes on a heating hot water system at a medical manufacturing facility in Rhode Island. Our freezes provided isolation so that our customer could replace multiple valves on the pumps without draining the entire building. #pipefreezing #pipefreeze #iceplugs #freezeplugs #jsbarryindustries

We are a 24/7/365 emergency service! Don’t hesitate to call us to avoid the cost and headache of a shutdown. Shown here is a custom enclosure we designed & installed for an emergency on a 400 degree steam line in Southern Connecticut. The leak was fixed less than 36 hours from the initial phone call. #leaksealing #liveleaksealing #liveleakrepairs #leaks #dontshutdown #emergencyservices #jsbarryindustries

This is a 2” instrument air line that corroded due to caustic in a paper mill in Northern Maine. We were able to replace our customer’s temporary repair attempt with a custom engineered enclosure. It worked like a charm! #leaksealing #leakrepairs #liveleaks #clamps #enclosure #dontshutdown #jsbarryindustries