GRANO-PHE

Brazed plate heat exchanger is a device that uses plate structure and brazing technology for heat exchange. It can effectively realize heat energy transfer, improve energy utilization efficiency and save costs. It is widely used as an evaporator and condenser. Choose GRANO brazed plate heat exchanger to provide a reliable heat exchange solution for your process!

A plate heat exchanger is a heat exchange device, mainly composed of many stamped metal and thin plates. These thin plates have specially designed corrugations, the purpose of which is to increase the turbulence of the fluid and thus enhance the heat exchange effect. When working, two fluids of different temperatures flow into the channels on both sides of the plate respectively, and heat is transferred from the high-temperature fluid to the low-temperature fluid through the plate.

As a manufacturer of detachable plate heat exchangers, most of the parts are manufactured by ourselves, with high cost performance, environmental protection and energy saving, and sufficient supply. GRANO is the source manufacturer of plate heat exchangers. We provide full-range services, including production, customization, sales and transportation. Both plate heat exchangers and brazed plate heat exchangers can be customized. If you need a plate heat exchanger, GRANO provides you with heat exchanger solutions!

Brazed plate heat exchanger is a high-efficiency heat exchanger made of a series of corrugated metal sheets stacked and brazed. The basic structure is composed of front and rear end plates and the middle corrugated plate. The angle holes of the pipes can be customized according to the actual application. Compared with shell and tube heat exchangers, it has the characteristics of cost-effectiveness, high heat exchange efficiency and small footprint.

Brazed plate heat exchanger is a high-efficiency heat exchanger made of a series of corrugated metal sheets stacked and brazed. The basic structure is composed of front and rear end plates and the middle corrugated plate. The angle holes of the pipes can be customized according to the actual application. Compared with shell and tube heat exchangers, it has the characteristics of cost-effectiveness, high heat exchange efficiency and small footprint.

The plates of the plate heat exchanger can be disassembled and reassembled, which makes maintenance and cleaning relatively easy. When the internal structure of the heat exchanger is blocked, it can be cleaned by disassembling the heat exchanger plates without stopping the machine for a long time or disassembling the entire equipment. This helps reduce maintenance costs and can extend the service life of the equipment.

Hello everyone, I would like to introduce a plate heat exchanger to you. Plate heat exchanger is also called PHE, a detachable plate heat exchanger, which is made of stainless steel precision plates and outer frame plates. The heat exchanger has four holes, which correspond to the countercurrent heat exchange on the primary and secondary sides of the plate exchanger. The plate heat exchanger has high heat exchange effect, small temperature difference, fast heat exchange speed, etc. GRANO is a source manufacturer of plate heat exchangers.

Don't leave, do you have a project that requires plate heat exchangers? Take a look. We are the source manufacturer of plate heat exchanger units. Whether it is a water-to-water plate heat exchanger unit or a steam plate heat exchanger unit, we can provide what you want. We have an independent R&D and design team, advanced production technology and equipment, and also support customization to meet the diverse needs of customers.

Both are heat exchangers, so why are plate heat exchangers so popular? Under the same operating conditions, the heat transfer coefficient of plate heat exchangers is 3 to 5 times higher than that of tube heat exchangers, and the heat recovery rate can be as high as over 90%. It occupies a small area and has a large heat exchange area, which is suitable for occasions with limited space. The area of the heat exchanger can be adjusted by changing the number of plates. Due to its structural characteristics and relatively easy maintenance and cleaning, plate heat exchangers are more popular.

Bosses who need plate heat exchangers please stop and watch this video, you will save a lot of purchasing costs. As the source factory, GRANO does not add layers of price increases, and delivers affordable prices directly to you. You can get higher quality heat exchangers with less cost. We have a professional R&D team that continuously innovates and makes breakthroughs, just to bring you more efficient and worry-free heat exchange solutions.