Equitable Access LLC.

Where can I get a copy of 2012 Texas Accessibility Standards (TAS)? You can see an online version at this link. https://lnkd.in/gFJFzQdw

What is 'TABS'? ABS stands for the Texas Architectural Barriers Online System. The TABS number consists of 'TABS plus a 10-digit number' (e.g., 'TABS2021123456'). This is a new project number issued by the Department upon official project registration.

When will the final inspection take place? If we were contracted beforehand to conduct the final inspection upon project submission, it will take place post the recorded construction completion date but before its one-year anniversary. This is subject to receiving a Request for Inspection Form from the property owner and verifying payment of the inspection fee. Without both, we will not conduct the inspection.

If a tenant pays for renovations to their space, does the owner have any accessibility requirements to fulfill? No, the owner does not have to provide accessibility if the tenant is making alterations to areas they exclusively occupy, unless the path of travel elements is also being altered. This is also covered in RAS Bulletin 2012-02.

Am I responsible for arranging the final inspection if construction took place on my property or building housing one or more tenants, and the tenant's design professional registered the project with the state? Absolutely. The Texas Architectural Barriers Act mandates that owners take on the task of arranging the final inspection. While design professionals are now obligated to register and get approval for the project, arranging the inspection falls on the owner's shoulders. Many design professionals are increasingly handling the final inspection during project registration to avoid any unexpected issues later on.

If I submit my drawings to a Registered Accessibility Specialist (RAS), do I also need to send them to TDLR? No, you can choose to send your drawings to a RAS for review instead of TDLR. Your records will be kept for five years.

We’ve encountered this situation twice this week and thought it would be helpful to share. When designing a bar countertop, be mindful that TAS requires an accessible portion to have the same depth as the non-accessible section, with a top height of 28"-34" A.F.F. and a minimum length of 30". This section must be fully integrated into the overall bar design, not look like an add-on. Hopefully, this tip helps with your next design project! #DesignTips #Accessibility #TASCompliance #Architecture

?? More Questions About Texas Accessibility Standards (TAS) and Registered Accessibility Specialists (RAS) ?? Q4: What is required after registering a project for the RAS? ?? 1. Complete Set of Construction Drawings in PDF Format: Include all prepared drawings (architectural, civil, MEP) in one file, separated by discipline. For new construction or additions, submit civil construction drawings if prepared. Ensure drawings are searchable and highlightable. Remove AutoCAD SHX text indicators by setting 'PDFSHX' to 0 in AutoCAD. Drawings don’t need to be professionally prepared or signed/sealed. Submit what was given to the authority for permitting. If unable to upload documents to TABS, email them to [email protected]. These documents become state property but are protected under the privacy policy. ?? 2. Completed TDLR Proof of Submission Form in PDF Format: Signed and dated by the Texas-licensed design professional responsible for the project. If no Texas-licensed professional, the POS form is not required. Enter the state-assigned TABS project number in BOX 9 on the POS form. In BOX 11, include the date the documents were issued and submitted. Texas-licensed design professionals must submit the documents directly to avoid repercussions. ?? 3. Plan Review Fee: Payment is required before the plan review can be performed. Purchase orders are not accepted. The $175 state project registration fee is separate from the plan review and inspection fee. This fee is administrative for issuing a TDLR project number. Q5: Do I need to make the entire building ADA compliant if I renovate it? ?? A: No, you're only required to bring specific areas like accessible routes, parking, restrooms, drinking fountains, and public telephones that serve the renovated area (if it's a primary function) up to ADA compliance if it's readily feasible. Stay tuned for more insights as we continue to clarify TAS and RAS processes, making compliance straightforward for everyone! #Accessibility #TAS #RAS #TexasStandards #Construction #Compliance #BuildingDesign #ArchitecturalStandards #ADA #ProjectManagement #BuildingRenovation #InclusiveDesign #EquitableADA

?? More Common Questions About Texas Accessibility Standards (TAS) and Registered Accessibility Specialists (RAS) ?? Q: How long does a RAS have to decide if they want to accept or decline a project? ??? A: A RAS has 30 days to make this decision. Q: When a RAS registers a project on behalf of a client, do they still need to accept the project in TABS? ?? A: No, when a RAS registers a project, they are automatically accepting it. They will not receive an accept/decline email. Stay tuned as we continue to demystify TAS and RAS processes, making compliance easier for everyone! #TAS #RAS #TDRL #Texas #ADA

? Have Questions About Texas Accessibility Standards (TAS)? We've Got Answers! ? Ever wondered how to register your project with the Texas Department of Licensing and Regulation (TDLR)? Here's a quick guide: 1.Register Your Project: Visit (www.tdlr.texas.gov/TABS) and create a user account with a valid email address. All project notifications will be sent to this email.? 2.Pay the Fee: The registration fee is $175, or $300 for late registration. Payments must be made online using a credit card. 3.Designate a RAS: Assign a Registered Accessibility Specialist (RAS) for the plan review and inspection. My RAS number is #1464. ?? Who Can Register a Project in TABS? Anyone can register a project in TABS by creating a user account first. Non-RAS users should register as “other” users, which includes owners, agents, designers, and tenants. For more details and to get your projects TAS-compliant, follow along as we answer more common questions! Feel free to let me know if you need any more adjustments!