Bandit Industries, Inc.

Charles Stansil (Owner, Charles' Tree Service, San Diego, CA) knows the ins and outs of the tree care industry. Starting as a groundsman working for a temp-agency, he quickly climbed the ranks to successful business owner through his hard work, commitment to integrity, and smart investments. So, when a friend suggested he try Bandit Chippers (after years of using a competitive product), he was immediately struck by the power, durability, and service support of the units. When big jobs began increasing, Stansil settled on the beefy Bandit 18XP, certain that it had the guts to make quick work of the gnarliest wood. And he wasn't disappointed! The Intimidator? 18XP is a highly productive 18" capacity drum-style chipper. Its powerful dual feed wheel system driven via (2) 32.3 CID hydraulic motors provide around 4,480 pounds of pulling power and the standard hydraulic lift cylinder enhances performance by providing additional down pressure reducing chainsaw work. User friendly options like the solid infeed tray with HD rim enhances the infeed's durability. 25-inch-wide feed wheels in lieu of the standard 20" make it easier for the feed system to collapse limbs into the chippers throat. Gas and diesel engine options are available ranging from 120 to 174 horsepower. Most configurations can keep the machine under 10,000 pounds. Key Features & Options 120 to 174 gas and diesel engine options available 37" diameter x 22" wide drum with four knives (2) 10 5/8" diameter x 20" wide feed wheels with bottom clean out door (2) 32.3 CID hydraulic motors 33 3/4" high x 64" wide infeed with folding tray Single 10,000-pound axle with (2) 215/75R 17.5" tires 360-degree hand crank discharge chute with end chip deflector (height adjustable) Bandit control panel with reversing auto feed Standard hydraulic lift cylinder Optional Hydraulic winch Optional solid infeed tray with heavy-duty rim Optional 25" wide feed wheels

Check out this Bandit 3680T equipped with a C27 1050HP engine running in Spain! This machine is producing chips at a rate of 400m3/hour for Biomass and its setup with an 8-knife chipper drum head. To learn more about this machine, please visit www.banditchippers.com or visit your local authorized Bandit dealer!

The SG-75 comes equipped with numerous features that make it the preferred choice by many stump grinding professionals. These features include a powerful Kohler 74 horsepower engine, reduced maintenance, massive chip containment, impressive cutterwheel swing and depth, and the ability to travel over a variety of terrain settings. Bandit’s Super Sweep is standard on the SG-75 (can be turned on or off) and will automatically back the cutterwheel away from a too aggressive cut. When the engine recovers its RPM, the cutterwheel will continue. The rubber tracks on the SG-75 expand to 55”, creating an extremely stable platform for grinding. To access tight or restricted areas, the tracks retract into 35”, easily fitting through most backyard gates. The SG-75 features an efficient gear box drive system to power the 27” diameter Bandit wheel with Greenteeth or New Revolution wheel with hex teeth. This setup is easy to maintain, only requiring quick maintenance after a break-in period. Control your machine with Bandit’s intuitive radio remote control. Every function on the unit is yours to command with the push of a button – including cutterwheel and track functions, blade, throttle, travel and swing speed, and more! Key Features & Options 27" diameter x 1" thick Bandit wheel with 32 Greenteeth 27" diameter x 1 1/4" thick New Revolution wheel with 44 hex teeth Wireless radio remote control with tether back-up Largest chip containment in its class! Expandable / retractable undercarriage (will retract into 35") Standard Super Sweep Maintenance free electric clutch

We're #hiring a new Sales Representative - West Coast Territory in United States. Apply today or share this post with your network.

Lead the industry in production with Bandit’s 74-horsepower track mounted stump grinder. Make wide cuts through stubborn stumps with the 80” wide swing, and chase roots nearly two feet deep. And with industry leading chip containment, the cleanup will be easier than with any other stump grinder in its class. Simply put, this unit will out-grind all the competition. To see one of these in action, please visit https://lnkd.in/g5hi_4Hz to find your local Bandit dealer!

When Tony Neglia, Director of Operations for Makelele Systems (San Diego, CA) was tasked with replacing a large chipper for large clear & grub and removal projects, he decided to give Bandit's 18XP a shot...and he hasn't been disappointed. The 18XP's combination of large vertical feed wheels, hydraulic direct down pressure, super-efficient auto feed regulation, and bullet-proof construction mean that Makelele can reduce the manpower required on each job...cutting less and letting the chipper do all the heavy lifting with very little interference. The BANDIT 18XP is a highly productive 18" capacity drum-style chipper. Its powerful dual feed wheel system driven via (2) 32.3 CID hydraulic motors provide around 4,480 pounds of pulling power and the standard hydraulic lift cylinder enhances performance by providing additional down pressure reducing chainsaw work. User friendly options like the solid infeed tray with HD rim enhances the infeed’s durability. 25-inch-wide feed wheels in lieu of the standard 20" make it easier for the feed system to collapse limbs into the chippers throat. Gas and diesel engine options are available ranging from 120 to 174 horsepower. Most configurations can keep the machine under 10,000 pounds. Key Features & Options -120 to 174 gas and diesel engine options available -37" diameter x 22" wide drum with four knives -(2) 10 5/8" diameter x 20" wide feed wheels with bottom clean out door -(2) 32.3 CID hydraulic motors -33 3/4" high x 64" wide infeed with folding tray -Single 10,000-pound axle with (2) 215/75R 17.5" tires -360 degree hand crank discharge chute with end chip deflector (height adjustable) -Bandit control panel with reversing auto feed -Standard hydraulic lift cylinder -Optional Hydraulic winch -Optional solid infeed tray with heavy-duty rim -Optional 25" wide feed wheels

2590 - TOWABLE DRUM STYLE WHOLE TREE CHIPPER Officially rated as a 23-inch capacity whole tree chipper, the Model 2590 actually has a 26.25-inch by 30-inch chipper throat opening so it easily handles large whole trees, tops, and logging slash. It features Bandit’s unique Slide Box Feed System and is available with a dedicated microchip drum to be utilized to produce a chip for pellets. A durable 37" diameter x 30" wide drum equipped with six dual edge or babbitted knives. This drum is so rugged it is backed by Bandit's 5-year "GUTS" warranty. Depending on engine options, the Model 2590 can fully load chip trailers in around 16-18 minutes. A standard 7 1/2' infeed conveyor provides further assistance for loading and pulling material into the chipper. Customers can choose from Caterpillar engine options that include a C18, 755 or 800 horsepower engines. The standard forestry style stationary discharge chute enhances chipping throwing velocity fully packing chip vans to their max capacity.

The Model 90XP is a 9" capacity disc-style chipper and has a distinguished career serving tree care professionals, rental companies and municipalities needing a productive, cost-effective, light-weight chipper. Weighing approximately 4,000 pounds with a gas engine this unit is the perfect solution for those needing a compact and easy to tow machine with the capability to chip material up to 9" in diameter. If you are looking for a disc-style chipper in a compact size and at a great value, then the Model 90 is a machine you should consider! The chipper disc sits at a 45-degree angle to the feed wheels creating a smooth, yet efficient cutting action requiring less horsepower to chip. The 90 is offered with a Kohler CH1000, 37 horsepower gas engine providing ample power and efficiency. A throat opening of 9 1/2" high x 17" wide along with a 29" high x 45" wide infeed provides ample room to easily feed material up to 9" in diameter. The powerful dual feed wheel system is driven via (2) 15.9 CID hydraulic motors providing approximately 3,376 pounds of pulling power. The optional hydraulic lift cylinder is recommended for additional pulling and compressing power making the unit easier to feed and more productive.

Bandit Industries is exhibiting at the NYS Woodsmen's Field Days, Inc. in Boonville, NY with our authorized dealers Ground Equipment and Kleis Equipment! Stop by and join us today through Sunday for an unforgettable experience with live demonstrations, forestry competitions, and much more.

Bandit Industries will be closing at 10AM Friday, August 2nd. The Bandit team will be enjoying our Company Picnic. We will resume to normal business hours Monday, August 5th at 8:00AM EST.