Take a Virtual Video Tour of Advanced Industrial, Mooresville North Carolina. Follow us! www.cncplastics.com
ADVANCED INDUSTRIAL
塑料制造业
Mooresville，North Carolina 1,212 位关注者
High Performance Plastic Shapes and CNC Machined Components
关于我们
Advanced Industrial is a Tier 1 distributor/fabricator, specializing in High Performance Plastic Machinable Shapes and Precision CNC Machined components manufactured from High Performance Plastics and Aluminum. Advanced Industrial employs some of the best Journey Level Machinists from all over the country who love what they do and have vast experience in machining complex, challenging parts made from materials like PEEK, PPS, Acetal, Ultem, PTFE, Ertalyte PET and Nylon.
- 网站
-
https://www.cncplastics.com
ADVANCED INDUSTRIAL的外部链接
- 所属行业
- 塑料制造业
- 规模
- 11-50 人
- 总部
- Mooresville，North Carolina
- 类型
- 私人持股
- 创立
- 1995
- 领域
- Plastic Machining、Plastic Bearings、Plastic Sheet, Rod and Tubular Bar和PEEK
地点
-
主要
获取路线
112 Meadow Hill Circle
US，North Carolina，Mooresville，28117
ADVANCED INDUSTRIAL员工
动态
-
Black Ertalyte machined with VERY thin cross sections to provide flexible grippers in the application. We had to make special jaws out of Aluminum so the grippers wouldn't bust apart when machining the part to final thickness. These were rather tricky! www.cncplastics.com
-
Machining UHMW Augers, 2.50" Diameter by 12" Long. The customer required a 32 finish inside the grooves so chatter would not be permitted. Easier said than done! www.cncplastics.com
-
Having difficulty machining PEEK? Here is the solution! Call ADVANCED INDUSTRIAL at 1-800-265-7351 / visit www.cncplastics.com! PEEK can be difficult to machine. If you machine it to slow it melts! If you machine it to fast it chips! We machine hundreds of thousands of PEEK precision components per year. Contact us today for a fast competitive quote. You won't be disappointed!
-
PEEK 450G Manifolds 1.00" Thick x 2.50" Wide x 10.0" Long. This part has over 30 intersecting holes and all the threaded holes were "Thread Milled" which produced virtually burr free threads which was extremely important in the application. There's also an 1/8" Diameter thru hole that we gun drilled through the 10" length of the part that intersects with all the side holes. www.cncplastics.com
-
-
Just finished these parts made from Ryton R4 40% Glass Filled PPS. Very tight tolerance parts with some features requiring us to hold tolerances as tight as +/-.0008 or +/-.02mm and flat within .001 inches. In order to do this, we had to rough machine the parts and perform a secondary annealing process. Ramp up 50° per hour up to 350°, hold for 1 hour then ramp back down 50° per hour back to ambient. I would like to thank Shawn M. at Drake Plastics for the advice on the stress relieving cycle. The parts came out fantastic! www.cncplastics.com
-