Flying can be a stressful experience, especially during a pandemic. You may wonder how clean and safe the airplane is, and what you can do to protect yourself and others from germs and viruses. In this article, you will learn how to effectively disinfect surfaces in an airplane, using the best practices and products recommended by experts and authorities.
Airplanes are enclosed spaces where many people come into contact with various surfaces, such as seats, trays, armrests, windows, lavatories, and overhead bins. These surfaces can harbor bacteria, fungi, and viruses that can cause infections and diseases. Disinfecting surfaces in an airplane can reduce the risk of transmission and exposure, and improve the hygiene and comfort of passengers and crew.
Die Desinfektion wirkt nur über einen sehr begrenzten Zeitraum von max. 5 min und wird w?hrend des operativen Gesch?fts nur w?hrend der Nachtstopp-Reinigung aufgetragen. => Keime k?nnen sich w?hrend des Tages stark vermehren! => permanent vorhandenes Infektionsrisiko! TiTANO AIR-Beschichtung wird einmal im Jahr aufgetragen. Sie reduziert permanent neu hinzukommende Keime. Die nachweisliche Reduktionsrate liegt bei 60-80% über 9 Monate! => ein hoher Keimpeak wird verhindert u. das Infektionsrisiko minimiert => eine niedrige Keimlast stimuliert weiterhin das Abwehrsystem der Passagiere, ganz im Gegensatz zu einem sterilen Raum! => die Airline spart Zeit u. Geld für Desinfektionsmittel => die allgemeine Hygiene wird verbessert!
Disinfecting surfaces on a plane seems obvious. Air travel could easily contribute to a pandemic as was the case with COVID-19. A sick passenger could transmit the virus they are carrying to the other side of the world very easily.
Disinfecting surfaces in an airplane is an important step to help prevent the spread of disease. According to the World Health Organization (WHO), the International Civil Aviation Organization (ICAO), and the U.S. Centers for Disease Control and Prevention (CDC), it should be done regularly, preferably after each flight or at least once a day. Approved disinfectants effective against a broad spectrum of microorganisms, including the coronavirus that causes COVID-19, should be used and applied according to the manufacturer's instructions for dilution, contact time, and safety precautions. All high-touch and frequently used surfaces, as well as any visibly contaminated areas, should be covered. Spraying or fogging disinfectants in the cabin is not recommended as it may pose health and fire hazards. Finally, used materials and personal protective equipment (PPE) should be disposed of properly and safely.
On some flights in Asian countries, cabin crew used aerosols for disinfection. Not very recommended. Disinfecting surfaces likely to come into contact with users' hands with soaked wipes would be more appropriate and effective.
The best products for disinfecting surfaces in an airplane have been tested and approved by the relevant authorities, such as the Environmental Protection Agency (EPA) in the U.S., the European Union Aviation Safety Agency (EASA) in Europe, or the Civil Aviation Administration of China (CAAC) in China. These products should have a registration number or a certificate to indicate their efficacy and safety, such as Quaternary ammonium compounds (QACs), hydrogen peroxide or peracetic acid, sodium hypochlorite or bleach, and alcohol-based solutions, such as ethanol or isopropanol. The appropriate tools should be used with these products, including wipes, cloths, sponges, or brushes. After the required contact time has passed, they must be rinsed or wiped off.
Mit TiTANO AIR gibt es eine nachhaltige Beschichtung, die auf allen Arten von Oberfl?chen (Sitze, Kopfstützen, Tische…) im Flugzeug aufgetragen werden kann, 1 ganzes Jahr nachweislich die Keimzahlen w?hrend des operativen Gesch?fts um 69 -80% reduziert, und zudem sehr gut hautvertr?glich ist.
Alcohol-based products seem to be the easiest to apply. It is an easily manufactured product, that everyone knows how to use and is quite effective.
In order to disinfect surfaces in an airplane effectively, it is essential to wear PPE such as gloves, masks, goggles, and aprons to protect yourself from exposure and contamination. Begin from the front of the cabin and work towards the back, or from the top to the bottom of the surface, so as to avoid recontamination. Clean the surface with a detergent or soap and water first, to remove any dirt, dust, or organic matter that may interfere with the disinfection process. Subsequently, apply the disinfectant to the surface according to the manufacturer's instructions for dilution, application, and contact time. Rinse or wipe off the disinfectant if necessary to prevent corrosion, staining, or residue. Dry the surface with a clean cloth or paper towel in order to prevent moisture and mold growth. Repeat this process for each surface using a fresh wipe, cloth, or sponge for each one. Finally, dispose of used materials and PPE in a sealed bag or container and wash your hands thoroughly.
Für die Akut-Desinfektion: TiTANO AIR gibt es ein wasserbasiertes Produkt, das ganz schnell mittels Elektrospray im Innenraum des Flugzeuges aufgetragen werden kann. Klar tr?gt man hierbei PSA wie Gesichtsschutz, Tyvek Overall, FFP3-Maske. => W?hrend des Auftragens werden bis zu 7 log-Stufen an Keimen abget?tet! => bereits eine halbe Stunde nach dem Auftragen kann das Reinigungsteam ohne PSA den Flieger betreten und mit dem Reinigen beginnen.
Disinfecting surfaces in an airplane can be a daunting task, but there are some tips and tricks to make it simpler and more efficient. To avoid missing any spots, use a checklist or map to keep track of the surfaces you have disinfected. Color-coded or labeled tools and materials will help prevent cross-contamination or confusion. Disposable or washable covers for seats, trays, headrests, or pillows can reduce the need for disinfection. Pre-moistened or pre-diluted wipes or sprays will save time and ensure consistency. Set a timer or watch to monitor the contact time of the disinfectant, so that it is effective. Lastly, use a flashlight or magnifying glass to inspect the surface for any signs of contamination or damage, to guarantee its quality.
Die hier geschilderten Massnahmen erfordern einen sehr hohen zeitlichen Aufwand an Logistik! Wesentlich einfacher und kostengünstiger ist ein Auftrag von TiTANO AIR mittels Elektrospray. Hierbei wird die einzigartige Wirkstoffkombination aus rein anorganischen Materialien bis in die kleinsten Ritzen/Poren der Stoffbezüge oder der Anschnallgurte aufgebracht. Die Applikation erfolgt einmal pro Jahr und wirkt unabh?ngig von Licht, Temperatur oder Luftfeuchte.