登录查看更多内容

Last updated on 2024年7月1日

How do you handle parasitic effects and noise sources in RC or RL circuits during transient analysis?

由人工智能和领英社区提供技术支持

Transient analysis of RC and RL circuits is a common task in electronic circuit design, but it can be challenging to account for the effects of parasitic components and noise sources that may degrade the performance or accuracy of the circuit. Parasitic components are unwanted elements that arise from the physical properties of the circuit components, such as resistance, capacitance, or inductance. Noise sources are random fluctuations in voltage or current that originate from various sources, such as thermal noise, shot noise, or interference. In this article, you will learn how to handle parasitic effects and noise sources in RC and RL circuits during transient analysis by following these steps:

此文章中的业界达人

由社区从 4 条内容中精选。了解更多

Hemanth Nag Chopparapu

Specialization in VLSI||Communication and Telemetry Engineer at KLSAT||Interned at National Remote Sensing…
Ricardo Erckert

integrated circuit design at erckert engineering
George Goodman

---------------------------------------

1 Identify parasitic components

The first step is to identify the parasitic components that may affect your circuit. These can include parasitic resistance, capacitance, or inductance in series or parallel with your ideal components, or parasitic coupling between different parts of the circuit. You can use datasheets, models, or measurements to estimate the values of the parasitic components, or you can use simulation tools to identify them. You should also consider the frequency range and the time scale of your transient analysis, as some parasitic effects may be negligible at low frequencies or short durations, while others may become dominant at high frequencies or long durations.

添加您的观点

Hemanth Nag Chopparapu

Specialization in VLSI||Communication and Telemetry Engineer at KLSAT||Interned at National Remote Sensing Centre-ISRO|| Interned at Tessolve Semiconductors ||Verilog||C|| JAVA||ECE Undergrad '25|| Anchor @Pulse Event
举报内容
Handling parasitic effects and noise in RC or RL circuits during transient analysis involves accurately modeling parasitics, using proper shielding and grounding techniques, and implementing low-pass filters to attenuate high-frequency noise. Additionally, choosing high-quality, low-noise components and utilizing advanced simulation tools helps ensure accurate and stable circuit behavior.

已翻译

赞

2 Model noise sources

The second step is to model the noise sources that may affect your circuit. These can include intrinsic noise sources, such as thermal noise or shot noise, or extrinsic noise sources, such as electromagnetic interference or power supply noise. You can use formulas, models, or measurements to estimate the noise power or voltage of each noise source, or you can use simulation tools to generate random noise signals. You should also consider the frequency spectrum and the correlation of the noise sources, as some noise sources may have a flat or white spectrum, while others may have a colored or shaped spectrum, and some noise sources may be independent, while others may be correlated.

添加您的观点

Ricardo Erckert

integrated circuit design at erckert engineering
举报内容
Check if the noise sources are statistically correlated or not. Uncorrelated noise: add the power of the sources Correlated noise: add the amplitudes of the noise.

已翻译

赞

3 Analyze the circuit response

The third step is to analyze the circuit response to the transient input signal and the noise sources. You can use analytical methods, such as differential equations or Laplace transforms, or numerical methods, such as finite difference or finite element methods, to solve for the voltage or current across each component of the circuit. You should also use appropriate tools, such as oscilloscopes, spectrum analyzers, or multimeters, to measure the actual circuit response and compare it with the theoretical or simulated results. You should also evaluate the quality and reliability of the circuit response, such as the rise time, the settling time, the overshoot, the undershoot, the signal-to-noise ratio, or the error rate.

添加您的观点

Ricardo Erckert

integrated circuit design at erckert engineering
举报内容
Even if the spectra look the same a transient measurement (for instance an approximation of a Dirac pulse) and a noise measurement (for instance white noise) can lead to completely different results. This is caused by non linear circuit behavior (pulse compression, rectification etc.). => a pulse test can't replace a test using RF sweeps.

已翻译

赞

4 Mitigate parasitic effects

The fourth step is to mitigate the parasitic effects that may degrade the circuit performance or accuracy. You can use various techniques, such as component selection, layout optimization, shielding, filtering, or compensation, to reduce or eliminate the impact of the parasitic components. For example, you can choose components with low parasitic values, arrange them in a compact and symmetrical layout, use shielded wires or ground planes to prevent coupling, use capacitors or inductors to filter out high-frequency or low-frequency noise, or use feedback or feedforward circuits to compensate for parasitic effects.

添加您的观点

5 Reduce noise sources

The fifth step is to reduce the noise sources that may degrade the circuit performance or accuracy. You can use various techniques, such as noise reduction, noise cancellation, noise shaping, or noise coding, to reduce or eliminate the impact of the noise sources. For example, you can use low-noise components, power supplies, or amplifiers, use differential or balanced signals or circuits to cancel out common-mode noise, use oversampling or delta-sigma modulation to shape the noise spectrum, or use error correction or encryption codes to recover the signal from the noise.

添加您的观点

6 Test and verify the circuit

The final step is to test and verify the circuit performance and accuracy under different conditions and scenarios. You can use various methods, such as sensitivity analysis, worst-case analysis, Monte Carlo analysis, or fault analysis, to test the circuit response to variations in the input signal, the parasitic components, or the noise sources. You can also use various standards, specifications, or benchmarks to verify the circuit performance and accuracy against the design requirements or expectations. You should also document and report the results and findings of your transient analysis and provide recommendations for improvement or optimization.

添加您的观点

7 Here’s what else to consider

This is a space to share examples, stories, or insights that don’t fit into any of the previous sections. What else would you like to add?

添加您的观点

George Goodman

---------------------------------------
举报内容
The question is vague and the answer is vague and useless. As with all AI narratives of this type, the answer is intended to seem erudite, but is in fact content free. Please do not pollute our technical literature with articles of this type.

已翻译

赞

Electronic Circuit Design

+ 关注

给文章评分

我们借助人工智能创建了此文章。您认为这篇文章怎么样？

很棒不太好

举报此文章

查看全部

How do you handle parasitic effects and noise sources in RC or RL circuits during transient analysis?

1

2

3

4

5

6

7

1 Identify parasitic components

2 Model noise sources

3 Analyze the circuit response

4 Mitigate parasitic effects

5 Reduce noise sources

6 Test and verify the circuit

7 Here’s what else to consider

Electronic Circuit Design

给文章评分

感谢您的反馈

更多Electronic Circuit Design相关文章

更多相关阅读内容