登录查看更多内容

How can you diagnose power supply problems in a television?

由人工智能和领英社区提供技术支持

Power supply problems in a television can cause various symptoms, such as no power, intermittent power, flickering screen, distorted sound, or overheating. To diagnose and fix these issues, you need some basic tools and knowledge of how a power supply works. In this article, you will learn how to check the power cord, the outlet, the fuse, the capacitors, and the circuit board for any signs of damage or malfunction.

此文章中的业界达人

由社区从 4 条内容中精选。了解更多

1 Check the power cord

The power cord is the simplest component to inspect, but also the most likely to cause problems. A loose, frayed, or damaged cord can prevent the TV from getting enough power or cause short circuits. To check the power cord, unplug it from both the TV and the outlet, and look for any visible signs of wear or tear. You can also use a multimeter to test the continuity of the cord, by setting it to resistance mode and touching the probes to the prongs and the other end of the cord. If the multimeter shows no or very high resistance, the cord is broken and needs to be replaced.

添加您的观点

陈佳

广州市鸿显电子有限公司 - 销售总监
举报内容
Diagnosing a power supply problem in a television requires some troubleshooting steps. Here are a few steps to help you identify power supply issues in a television: 1. Check the power outlet 2. Inspect power cables 3. Check the power indicator 4. Look for visual cues 5. Test the power supply unit 6. Consider professional assistance

已翻译

赞

2 Check the outlet

The outlet where you plug in your TV can also be a source of power supply problems. A faulty or overloaded outlet can cause voltage fluctuations, sparks, or power outages. To check the outlet, plug in a different device, such as a lamp or a radio, and see if it works normally. You can also use a voltage tester or a multimeter to measure the voltage of the outlet, by inserting the probes into the slots. The voltage should be around 120 volts in the US, or 240 volts in other countries. If the voltage is too low or too high, you may have a problem with the wiring or the breaker, and you should contact an electrician.

添加您的观点

3 Check the fuse

The fuse is a small device that protects the TV from power surges or short circuits, by breaking the circuit when the current exceeds a certain limit. The fuse is usually located inside the TV, near the power cord connector. To check the fuse, you need to open the TV case, by unscrewing the back panel and removing it carefully. Then, locate the fuse, which is a cylindrical or rectangular piece of glass or ceramic with metal caps on both ends. You can use a multimeter to test the continuity of the fuse, by setting it to resistance mode and touching the probes to the metal caps. If the multimeter shows no or very high resistance, the fuse is blown and needs to be replaced.

添加您的观点

Charles Payne

| Angel Investor | CISO | Cyber Security | DFIR | Professor | Speaker | #cisoevents | #horizonsummit
举报内容
Before you open the TV case, UNPLUG it from the WALL. Remove power completely to avoid shock or electrocution. These tasks while easy, should only be preformed by persons that understand the safety requirements and follow the proper safety procedures.

已翻译

赞

4 Check the capacitors

The capacitors are components that store and release electrical energy, and they are essential for regulating the voltage and current of the TV. The capacitors are usually located on the power supply board, which is a large circuit board with many wires and connectors. To check the capacitors, you need to open the TV case, by unscrewing the back panel and removing it carefully. Then, locate the power supply board, and look for any capacitors that are bulging, leaking, or burnt. These are signs of capacitor failure, and they can cause the TV to not turn on, or to turn off randomly. You can also use a multimeter to test the capacitance of the capacitors, by setting it to capacitance mode and touching the probes to the leads. If the multimeter shows a very low or very high capacitance, or no reading at all, the capacitor is faulty and needs to be replaced.

添加您的观点

Charles Payne

| Angel Investor | CISO | Cyber Security | DFIR | Professor | Speaker | #cisoevents | #horizonsummit
举报内容
If you research (look at the defective capacitors, if any, they normally easy to replace. Again, you should have a firm understanding of principles of electronics, for example, if you hold the power supply in your hand which completes the circuit of any charged capacitor you will be shocked as a result.

已翻译

赞

5 Check the circuit board

The circuit board is the main component that controls the functions and features of the TV, and it communicates with the power supply board, the screen, the speakers, and the remote. The circuit board is usually located behind the power supply board, and it has many chips, resistors, and diodes. To check the circuit board, you need to open the TV case, by unscrewing the back panel and removing it carefully. Then, locate the circuit board, and look for any signs of damage, such as cracks, burns, or corrosion. You can also use a multimeter to test the voltage and resistance of the circuit board, by setting it to voltage or resistance mode and touching the probes to the terminals or the solder joints. If the multimeter shows a very low or very high voltage or resistance, or no reading at all, the circuit board is defective and needs to be replaced.

添加您的观点

6 Here’s what else to consider

This is a space to share examples, stories, or insights that don’t fit into any of the previous sections. What else would you like to add?

添加您的观点

Charles Payne

| Angel Investor | CISO | Cyber Security | DFIR | Professor | Speaker | #cisoevents | #horizonsummit
举报内容
While this article might ask you to test things, do NOT do it with it plugged into the electrical outlet! It can cause severe injury or even death depending on the type of TV.

已翻译

赞

Computer Hardware

+ 关注

给文章评分

我们借助人工智能创建了此文章。您认为这篇文章怎么样？

很棒不太好

举报此文章

查看全部

How can you diagnose power supply problems in a television?

1

2

3

4

5

6

1 Check the power cord

2 Check the outlet

3 Check the fuse

4 Check the capacitors

5 Check the circuit board

6 Here’s what else to consider

Computer Hardware

给文章评分

感谢您的反馈

更多Computer Hardware相关文章

更多相关阅读内容

How can you diagnose power supply problems in a television?

1

2

3

4

5

6

1 Check the power cord

2 Check the outlet

3 Check the fuse

4 Check the capacitors

5 Check the circuit board

6 Here’s what else to consider

Computer Hardware

给文章评分

感谢您的反馈

查看其他技能